Experts recommend the use of gypsum boards, in order to make the wall smooth and gladkimiBlagodarya gypsum boards can perfectly align the walls and ceiling inside. There is no need to buy additional tools to smooth the surface. Moreover, the use of gypsum board ensures that the finishing is carried out efficiently and perfectly. Such variant sewing the walls in the room allows even out any unevenness with various differences. Typically, if the difference is up to 5 cm, then it is possible without the frame wall sheathing. If the figures higher than 5 cm, then it is necessary to install a special frame for laying plasterboard.
Styling tools when repairing drywall
To perform the work and professional specialist can. But if you want, you can always learn how to put the FCL in an apartment or cottage. Suffice it to consider all the recommendations and advice of a qualified master. First, all should prepare the necessary materials and tools for working with gypsum boards.
be sure to start the repair work should be complete with all the tools and materials that may be needed in the process of
Tools and materials:
- GCR conventional, water-resistant or refractory, laminated or purple. It all depends on the room where the works will be performed.
- Special metal profiles;
- Wooden blocks;
- Plugs and suspension elements;
- Scissors on metal;
- Simple pencil or marker;
- The alignment level;
- Reinforcing tape;
Once all the tools to be prepared, you are ready to go. This is no big deal, not necessarily possess professional knowledge and skills, to sheathe the walls of the FCL own.
Useful tips for applying drywall cladding
Work with gypsum boards quickly and easily. Experts recommend that approach the wall with the responsibility to not have to call the specialist and redo everything. Plasterboard paneling significantly accelerates the repair of the premises.
In order to quickly and accurately lining the walls of plasterboard, it is better to seek help from professionals
- Firstly, work better with a partner. Plasterboard very large. It is very inconvenient to carry out the assembly.
- Secondly, to tighten the screws, it is better to use special repair tool - a screwdriver. It has limitations with regard to the depth of screwing of the screw. So do not get overdone.
- In addition, if the walls are sheathed with plasterboard inside a wooden house, then you should treat all items antiseptic. Especially those who remain under the sheets of plasterboard.
- If the room there is high humidity, then it is recommended to use the appropriate class and drywall. Typically, such a restorative material looks a bit greenish.
For work that requires no special tools, and after installation is not much construction waste as after a normal repair.
How to put on drywall frame
There are two methods of cladding gypsum boards. The first - a skeleton installation. Second - frameless when installing panels by means of a special adhesive. But this option provides for certain restrictions in the job. For example, the height of the wall should be the same as the sheet of drywall. This is necessary to get the most smooth interface. In addition, it is necessary to prepare the surface for the work that it is as flat.
A mandatory step is to mount the frame of metal profiles
The most commonly used method is frame cladding with plasterboard.
This method is practical and popular, so use it to sew up the wall can be yourself. It provides its own advantages and merits, and for which he is chosen. Thus it is possible to sheathe even stairs in the house to create an original interior addition.
- Work is carried out relatively quickly and easily;
- Frame cladding surface can hide any defects, regardless of size and status;
- Under gypsum boards can hide any communication system;
- Such a plating method makes the room more attractive.
The frame may be made of wood or metal profile. It's important to think about how to make the frame under the plasterboard lining. He is determining the final work. Experts recommend using it to create a metal profile frame base.
Phased installation of drywall
Before you begin, you should decide on the plating method. The frame is in demand due to the fact that the secret communications system and can be installed on any uneven surface. You can use this method of plating in the kitchen and in the bathroom, because it is possible to lay the tiles immediately. Among the disadvantages are the complexity, high cost and the need for a large room.
Selection plating process depends on the surface quality
Properly and carefully follow the instructions, you can quickly and easily enough to make all the repairs that are associated with plasterboard
Frameless way to skin an inexpensive and quick saves space. But for the wall, even with minor defects are not suitable. Furthermore, tiles, sound insulation or heating material can not be used with such method.
Stages of work:
- Using the building level, it should be noted places where horizontal profiles are installed under the plasterboard. Marking should be checked several times, we need accurate data.
- Set central rack profiles, keeping a distance of 40 - 50 cm. Fasten them to the wall of the special arrangement of the metal supports with a 60 cm.
- Blank frame space can be filled with insulation. This is especially necessary if made cladding on the outside of the house.
- For cutting the sheet of stationery use and construction knife. First applied the markup, and then use a knife.
- Install gypsum board and fix it with screws to a profile. The protrusion always looked outward. Carefully and gently, do not get too zealous, otherwise we will have an additional twist screws elsewhere.
- The final stage of work - is the jointing. It uses a special putty reinforcing tape, spatula and trowel small.
Experts recommend carefully and thoroughly to seal the seams, the surface is as even as possible. After processing, it abraded special grater or regular sandpaper. It is mandatory to handle the finishing putty entire surface of the GCR.
Examples plasterboard cladding (video)
Sheathing plasterboard is not certain difficulties. Everything is easy and simple. This unique version of the wall design allows you to create the most level surface. Using plasterboard for wall, you can create the most original designs. Dramatically change a room. It is enough to have patience and express their imagination. If properly follow all useful recommendations, the result is sure to please, especially if done by hand.