Weave beaded bonsai own hands: 7 ideas and master classes – nwhistorycourse.org

The Blog

Miniature trees of beads will decorate any interior or become an original gift a loved oneMiniature trees of beads will decorate any interior and original gift will close chelovekuIskusstvo grow small trees are widely spread on needlework. Now Exercise: Creating beaded trees, also called "bonsai". Correctly picking up the original material in the actual colors, obtained extraordinary and unique miniature trees. Bonsai in this embodiment can acquire the most original and unusual shape.

We make a bonsai tree from beads: weaving scheme

plaiting bonsai scheme is very simple, but slightly different for each type of wood alone. Consider the weaving process by the example of the popular tree.

bonsai weave diagrams, which are described below, may be applied to other types of weaving trees, changing only the amount of space beads and twisting the wire.

The number and shape of the branches are determined individually. It depends on the attractiveness of the finished bonsai.

classic bonsai

Mark the wire 50 cm and put on her 8 pcs. beads, twist it 2 times in a loop. The same is done with the same wire to form 8-loops in one row. To form a bundle of three such blanks.

Each branch bonsai is formed of 3-4 smaller branchesEach branch bonsai is formed of 3-4 smaller branches


Further, the beams are formed at a certain location in the branches.

bonsai birch

0.3 mm on a wire 12 strung beads. Connect the first to the last twist and below link. Retreat of 1 cm and perform a second loop. As a result, should get out of the same 13 loops - 5 pcs on both sides and 3 at the top. Bonsai Birch need 50 such branches.

Bonsai money tree

5 beads strung on a wire, bends it and is passed through the back end piece 4. Next, we perform the same process with one end and the second wire. To form a sheet of the money tree is necessary to alternately stringing beads in ascending order, and then vice versa.

other schemes pictures can be viewed on the Internet.

Classic Bonsai of beads: the necessary material

Classic bonsai - tree with an impressive trunk and green branches.

Before the start of weaving beaded trees should prepare the necessary materials and tools for the jobBefore the start of weaving beaded trees should prepare the necessary materials and tools for the job

Necessary material:

  • Green beads;
  • Robust wire branches;
  • Wire of copper for the barrel;
  • Scissors;
  • wire cutters;
  • Glue;
  • Alabaster;
  • thread;
  • Scotch;
  • Brush and acrylic paint;
  • Decor.

For a classic bonsai usually take several shades of green, this set is needed for mixing it to the tree. Wire branches to better take brown thickness not less than 0.3 mm, and copper - 2 mm. Clay is better to take the time, a hot melt adhesive or superglue. Acrylic paint can be replaced by art. The décor may serve as: pebbles, moss or artificial grass, shells.

Paint a tree trunk paint better than several times, using different shades. With each layer of bark is transformed into a natural appearance.

Weave a crown of beads for bonsai

bonsai weaving process starts with a beaded crown. Step by step to do this is much easier than to suffer and spend a lot of time to spare.

Shaping the future crown of the tree, be sure to take into account that the upper branches should be much shorter than those that are located belowShaping the future crown of the tree, be sure to take into account that the upper branches should be much shorter than those that are located below

Stepping weaving crown bonsai:

  1. Dial the solid wire 0.3 mm 8 loops, each bead 8 stuff;
  2. Twist and cut, leaving 10 cm of the tips (such need 150 pcs.);
  3. Twist in one bundle with three small woven (released 50 pieces of everything.);
  4. Combining top of the bonsai of 3 beams and then tightly wrap the thread;
  5. Just below the threads of the attached 2-beams at the same level laterally and fix the thread (threads of the first row);
  6. Back to the drawing of the second series branch, and a beam connecting the two thread wrap, then more three times at 2 (two such threads need);
  7. To start formation of branches 3rd row same principle attaching beam 2 four times.

Now we collect all the branches together and form a bonsai.

Crown of the tree can be woven beads of the same color or combine several colors.

Sakura Bonsai Bead: Master Class

Very soft and romantic looks Sakura Bonsai. Make branches very quickly, knowing a simpler version of netting schemes.

Material for a bonsai Sakura:

  • Pink beads of several colors;
  • Duct tape;
  • Thick wire;
  • Scissors and cutters;
  • Wire of 0.3 mm;
  • Gypsum;
  • Stand;
  • thread;
  • PVA glue;
  • brush;
  • Acrylic paint brown.

Making beaded tree trunk is made using plaster solutionMaking beaded tree trunk is made using plaster solution

Paint the trunk in several colors, highlighting depression crust darker shade.

making classes Sakura steps:

  1. Dial the wire beads for approximately 15 cm;
  2. To withdraw from edge 10 cm and make the first loop of 7 pcs, spin at 3 revolutions;
  3. To withdraw from the first tabs of 1 cm and perform a second, then the next - all 17;
  4. Excess beads to remove the remaining wires and cut, leaving the edge at 10 cm;
  5. Curl "necklace" between themselves, starting from the middle loop and bend scored hinge to the head (such blanks need pieces 20 and 10 on the tabs 13,11 and 15);
  6. Next, all workpieces forming on the branch of the two 17-loop and one smaller;
  7. From the resulting 2-3 medium large branches are twisted and wrapped around them with adhesive tape;
  8. Cutters divide thick wire to the required lengths for forming barrel, dissolve it and the inner wire is twisted in a winding among themselves, leaving 5 cm from the bottom for the roots;
  9. Dilute plaster in the cake and place it in the cradle by placing the center of the tree skeleton, waiting for drying;
  10. We begin to attach to the branches of the tree skeleton from the top down, and wrapped with thread entire trunk;
  11. Then treated with PVA trunk several times and the top brush in 3 stages with a mixture of gypsum with glue;
  12. Paint a tree trunk paint.

In the end, if desired, you can decorate the stand pebbles or moss.

Formed clumps in the mixture of gypsum and glue to remove unnecessary, it will add an additional relief bark.

Azalea: beaded bonsai master class

Set of material and tools for weaving azalea of ​​beads is the same as for other bonsai. Azalea is woven from green leaves and flowers of pink or red hues.

Ready mini-bonsai can be placed in an ordinary flower pot, pre-weighing it fine gravelReady mini-bonsai can be placed in an ordinary flower pot, pre-weighing it fine gravel

weaving leaves

  1. Beads strung on a wire segment 60 cm;
  2. Measure the wire tail 10 cm and a separate bead, obkrutit its several revolutions;
  3. On the free tail 5-6 stuff beads strung, and on the working measure same beads and connect both ends of the pair of windings;
  4. One end of the beads with wrap around a portion of the free beads (will first arc);
  5. The second arc is performed in the same way, by connecting the ends of the base.

It looks interesting leaf with a different shade of green inside.

Flower size for azaleas bead must be a little more leaf.

Plan the number of beads in the turns required to weave pieces.

flowers Weave

  1. Mark 15 cm and a wire strung beads 5, it will be the central axis;
  2. Requires separate another piece of 30 cm - the operating wire;
  3. Mark operating wire retreat 1 cm and a central axis under the wrap ready 5th beaded bottom;
  4. Strung on a second end 7 beads and connect several turns on top axis.

Scheme weaving azaleaScheme weaving azalea

Each successive arc performed in the same way, each time increasing the number of beads on 2 things. Stamen lagging very easily. 15 is strung on the wire beads and one edge to skip back bypassing 3 beads. Get leg with three beads at the top. Number of flower petals in real 5. They are formed around the stamens.

Stamen color is best to choose a tone higher from a flower.

Mini Bonsai Bead own hands: Mater-class step by step

Mini bonsai more jewel activity, requiring greater care and plodding than usual trees of beads. At first glance it may seem that the tree in miniature design requires less effort and time, but it is not. It's pretty anxious and openwork beading, which not everyone will dare to tinker. To work needed exactly the same tool and material as previously described for.

Weave flowering bonsai is as follows:

  1. We must start with blanks flowers 5 beads on 5th loops and sheets on beads 7 to 3 eyelets (15 blanks would be enough, but can be more);
  2. We form a solid product in a way that was in the middle of the flower and petals are tightly wrapped him;
  3. On thick wire attach workpiece legs, and the top thread.

Flowering mini-bonsai is ready, it should now be put on the foundation. Dilute gypsum and water to a dense state and to put our tree, not necessarily in the center. We are waiting until the base is dry. Now you can "progipsovat" tree trunk in 2 doses, each well must be dry. koruna opened paint if desired.

Tree of Love bead unforgettable romantic gift on Valentine's DayTree of Love bead unforgettable romantic gift on Valentine's Day

Mini bonsai is a good gift as a souvenir made by the hands.

Ideas for bonsai "Love and wealth" of beads

Tree of Love is always carried out in the form of one or two hearts. At the heart of the crown bonsai - wire in the form of heart. Love is always associated with fire and passion - so fiery red.

Interesting ideas for bonsai "Love"

  • The heart may be implemented as two separate halves of red and white or red and blue;
  • Bonsai can decorate any flowers and buds;
  • A good combination can serve two separate hearts on a common base, symbolizing the two souls of a whole;
  • Decoration of the bonsai can be angels figurines, fountains and swans;
  • Liana - perfectly complement the romantic bonsai;
  • An additional decoration can serve bow of satin tape saturated color.

Good option for decorating bonsai love and wealth could serve as a coin feng shui. Options for such a lot of bonsai - it can be strictly enforced no-frills, traditional or classic checkered and luxury with different decorative elements.

Dilute contrast red to help beads in silver or gold color.

Tree "Willow" waterfall of beads (video)

Understand and experience the fascinating mood beaded bonsai, you can look the works of famous authors. The most popular - Dmitry beaded druid. Works in its implementation adored by many professionals of the art. In blogs and on beading guide contains many tips and useful information. In his works, lamps lies a world of puzzles and enchanting forces. Such products are inspired on the coziness and romance.

Bonsai bead (photo)


Leave a Comment

Your email address will not be published.

+ 31 = 33