Tiles on the drywall in the bathroom - it's not only beautiful, but also praktichnoSegodnya more consumers are concerned about that finishing surfaces are not only functional, but aesthetic and carried a load of non-residential premises. That is why many people prefer to coat the surface of ceramic tiles. That it is better to go well to the surface, many first make installation of drywall. It has a smooth surface that allows easy and high-quality tile laying. Ceramic tile on drywall in the bathroom just fit, if you know a strict sequence of operations.
Laying the tiles in the bathroom on the sheetrock: Benefits surface
Facing the bathroom tiles often perform. Laying process can be quite time-consuming, if the wall surface has irregularities and variations. Previously, before laying tile surface treated plaster, sand or plaster solution.
Many people prefer to choose tiles for decoration gypsum board, as it is safe for health
Today more and more artists prefer to lay the tile directly on the installed drywall sheets.
This type of material allows you to trim without excessive dust and dirt. At the same time laying the tile takes much less. Laying tiles on gypsum boards has many advantages.
Benefits laying on GCR:
- Safety material for health;
- The high level of fire resistance;
- High thermal insulation properties;
In order that the surface is solid and reliable, it is necessary to pay attention to the choice of material. Sheets of drywall should be suitable for wall tiles. Bathroom the best solution is to buy a waterproof GCR.
Drywall in the bathroom for tiling: which option to choose
Bathroom subject to frequent swings in temperature. Despite the fact that today the laying of tiles on a plaster surface - a fairly common phenomenon, many do not know what kind of drywall preferred. From the choice of material depends on the success of the repairs.
For cladding tiles fit two kinds gipsovolokna. However, each species has its own characteristics, which affect the quality of installation.
To finish the bathroom is better to choose water-resistant drywall
When choosing the drywall is important to pay attention to the markings. Drywall in the bathroom should be selected with a mark - gypsum plasterboard. This means that a special hydrophobic impregnation has been applied to the sheets.
Options for using drywall:
- Plain. In most cases it is used to sheathe the walls and ceilings in residential areas in the repair and zoning rooms.
- Hydrophobic. Plasterboard impregnated, which does not allow water to deform the material.
Water-resistant gypsum board - reliable coverage that allows you to perform quality cladding tiles. With this material it is fashionable to be sure that the constant exposure to moisture and water do not result in unusable plasterboard and, hence, the tile.
How to glue the tiles on the bathroom drywall: step-by-
Laying tiles on gypsum board can be done by yourself. To do this, you must first read the instruction and maintenance stages. Initially, the surface should be finished with plasterboard.
How to perform the installation of gypsum board, can be read online at specialized sites.
Before you start laying tiles are kindly requested to familiarize themselves with the progress of repairs
It is important to install gypsum board so that their surface is stable and strong, then the tile will hold fast and reliably. It is best to use during installation and the grid plate. Mounted surface should be thoroughly primed and poshtukaturit.
Phased sticking the tiles:
- Apply adhesive on portion size in sq. M.
- Stick the tiles on plasterboard.
- Several times to hit the tile with a rubber mallet.
To glue the tiles on gypsum board did not notice a lot of time. In order to be sure of the reliability of gluing, it is necessary to choose high-quality adhesive. On its type will also depend on a firm connection surfaces.
Tile adhesive on the drywall in the bathroom
The choice of adhesive for gluing tiles to plasterboard can significantly affect the outcome of the repair work. It is important to note that not all types of glue can glue the tiles to plasterboard. That's why finding the right kind of need to do in advance.
To tile securely and firmly glued to drywall, it is necessary to choose a quality glue from a trusted manufacturer
Mounting the tiles to plasterboard can be performed using two types of glue. Purchases can be made in specialty stores or online.
Manufacturers offer a ready-made dry mix, you need to prepare yourself. The choice of the manufacturer depends on personal preference and repair budget. Perform preparation glue mixture is necessary according to the instructions, which is indicated on the packaging.
Types of adhesives:
For the preparation of flexible adhesive need water and dry mixture. Cement adhesives can be used when working with paper surfaces. It is important to remember that the adhesive has the ability to rapidly solidify, so do not just cook the entire composition.
Laying tiles on the drywall in the bathroom (video)
Bathroom - room, the surface of which requires a special finish. It should be durable, reliable, resistant to moisture and temperature changes. That is why many come to the decision to put the tiles on bathroom surfaces. It is best to put the tiles on the water-resistant drywall. It has a smooth surface which contributes to a reliable bonding materials. Repair work should be carried out in strict sequence. Lay tiles after install the plate and fulfill their primer and putty.