The hem ceiling on wooden beams: Designer Recommendations

The hem ceiling on wooden beams: Designer Recommendations

12 October 2017



Wood-beamed ceilings - it is an important structural element which is responsible for the strength of the ceilingWood-beamed ceilings - it is an important structural element which is responsible for the strength potolkaPo wooden beams ceiling is not necessarily should be closed by any material. Previously we did so for the most part. That is, each joist closed duct of the same drywall, or just leveled all on the level, thereby cutting off almost 20-30 cm layer of the ceiling. It was possible to convert all the ceiling, replacing the beams, but why do that when you can decorate all reasonable? Moreover, all this is not hard to do with their hands.


What is the rough ceiling on wooden beams

Rough ceiling - this is the layer that will serve as the foundation for the subsequent construction work. That is, it will be attached to the waterproofing, thermal insulation, decorative filing and, if necessary, even a false ceiling. Consisting of the rough base of transversal boards and beams that hold the entire weight of the structure. Its traditional device. You can use the very same technology that is used in the attic. But with regard to the shape - it is flat, rather than triangular or multi-pitched.

Rough ceiling decoration may be performed by the following materials:

  • tree;
  • GCS;
  • plastic (including the panel);
  • drywall;
  • other billing that mimic traditional building materials (there are both synthetic and natural).

Making rough ceiling using drywall - it's the least expensive and most effective way of finishingMaking rough ceiling using drywall - it's the least expensive and most effective way of finishing

It should be understood that the rough ceilings do not protect the room from the cold water. That is, the filing is required to perform these functions. Therefore, it is performed and multilayer. On the beams, for example, stacked basalt slabs or just runs a bed of sawdust, and already top - mounted decorative paneling.

Wooden ceiling with exposed beams: the implementation of a binder

How to perform filing on-site bars? As it was written above - just create the same box, but with a minimum indentation. Those same board, for example, are mounted on the perimeter of the guide profiles. Directly to the joists are attached with screws or dowels ordinary (if wood density - are different). Naturally, all surface dirt before it is processed emulsion (in several layers, as it dries). As a result, should get a so-called rustic decoration, in the style of "hunting" lodge. It looks beautiful and protects the room from the cold, moisture, noise (if you follow the basics of the technology).


And you can create a decorative beams and not closing them. For this purpose the so-called architectural carving. On top of all of this is painted brown paint or simply varnished (if you want to preserve the color and texture of the wood).

A great idea is dressing the rafters using decorative threadA great idea is dressing the rafters using decorative thread

Traditional solutions to the ceiling with exposed beams:

  • the creation of conditional ramp;
  • decorative carvings;
  • Cabin only the width between the beams.

In that case, if the tree is "open", it is also recommended to be widely used in interior decoration, for example, adding to his posts, crossbar, giving up plastic window profiles and window sills. All this will blend in nicely with fireplace.



Decorative wood beams on the ceiling: the choice

Decorative beams on the ceiling is recommended to buy ready-made - are sold in all major DIY stores. Their design can be quite varied.

Moreover, beams can be produced even from wood, but merely mimic the desired surface (but having considerably less weight than the wooden structure). There are also hollow beams (in the construction of their call as a falshbalki). They have a very low weight, so they can be mounted simply on the screws.

Mounted wooden beams in the house the usual way - that is, on the perimeter, partly by integrating into the wall. On average, if necessary, it is done tightening (to provide mechanical stability).

Ceiling falshbalki polyurethane are lightweight and perfectly mimic the material made of natural woodCeiling falshbalki polyurethane are lightweight and perfectly mimic the material made of natural wood

Sheathe it beams - not necessarily. The distance between them closes or plastic or lacquered boards. Wood necessarily treated with varnish.

This will ensure that:

  • its protection against moisture and pests;
  • improve visual beam;
  • create a glossy reflection effect (can be combined with directional lights that give a soft reflected light).

Hem and plasterboard can be, but it has a whole lot of flaws. It is better to take advantage of its draft basis, and on top - to decorate a tree or a foam with imitation wood. Get a nice and inexpensive.

How to perform design-ceiling wooden beams

If there is a desire in the interior to create a "village" style, then close the beams in any case should not be. You can even use the log cabins are not processed (ie, just stripped of bark) and reinforce the ceiling them, "priraschivaya" the wall. However, the installation will not be easy, since the weight of the beams themselves to be quite large.


The ideal situation for the decoration of the ceiling beams - a renovation in the old wooden house from a frame (such as well), so widespread in the northern regions of Russia.

If it is decided not to sew and do not hide the beams, the wood should be treated with stain and varnishIf it is decided not to sew and do not hide the beams, the wood should be treated with stain and varnish

Further wood can be treated in several ways:

  • brushed (removal pattern without machining);
  • invoice processing (artificial creation of cracks, depressions that mimic the great age of wood);
  • combination of special coatings that gives the effect of natural aging timber;
  • addition beams forged elements. Designers such a solution is isolated in "ethnic design";
  • oil-wax coating - the most cost-effective solution for processing.

The main advantage of using the beam - that there are no specific rules for their decor. That is, it all depends on the imagination of the house owner. They can be given any shape, texture, varnish, or just a primer.

Installation of decorative wood beams of the ceiling (video)


In the future, for "refreshing" the visual component produced scraping and re-coating (painting). Fulfill this need only 1 time in 5-10 years, as required. 

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

− 5 = 1

map