The construction of two layers: two-level ceiling of plasterboard

The construction of two layers: two-level ceiling of plasterboard

12 October 2017



Duplex plasterboard ceilings emphasize and complement the overall design of the roomDuplex plasterboard ceilings emphasize and complement the overall design pomescheniyaKrasivye ceilings in the room - it is always a very important touch to the overall appearance of the room. The shape and design of the ceiling are not perceived separately, it is part of the overall design concept, so the design should be stylistically and color to be an organic environment. To look at her, and it was nice, and the specifications do not cause problems.


Bunk ceilings: preparation

First and foremost, of course, prepare a sketch or drawing of future construction. You do not only need to define its design, but also to make the calculation of materials. To do this, you can take advantage of special online calculator where you enter data (size of the room, etc.), and the service calculates how much will need drywall, fasteners, etc.

Making a two-level ceiling of plasterboard is impossible without the creation of sketches and calculationsMaking a two-level ceiling of plasterboard is impossible without the creation of sketches and calculations

Next you need to do the dirty work, or rather, to make sure that all the wet work is fully completed. We are talking about the rough finish of the walls, floor screed, etc.

Follow and conditions in which the repair is carried out - the humidity must not be higher than 75%. A temperature - not lower than 15 degrees.

Next you need to do a background check bubble level meter ceiling horizontally. The deviation is 5 mm or more requires surface alignment. If the plaster peels off strongly, very dusty, remove it to overlap the room dry, process primer and ceiling zashtukaturte. But if drywall constructions will take all of the ceiling area, the ceiling is the basic process is not necessary.


Two-level ceilings in the apartment: what are necessary materials and tools

If you are sure that the height of the room is enough to hang two more tier if all the ideas and options reviewed, approved sketch, you can prepare the necessary tools and materials.

Drywall installation requires accuracy and precision, so a set of measuring and installation tools neededDrywall installation requires accuracy and precision, so a set of measuring and installation tools needed

Tools for the job:



  • Screwdriver and hammer;
  • Water level and generally with the level;
  • Upholstery cord and thread construction;
  • Ladder;
  • Drywall Saw;
  • Roulette and square;
  • Pencil;
  • A knife with a blade under the GCR;
  • A hammer.

Installation 2 tiered ceiling assumes the presence of the following materials:

  • GCR;
  • The carrier and the guide profiles;
  • U-shaped hangers;
  • Screws for metal.

First you pick the frame on the perimeter of the ceiling, then it is sheathed with plasterboard on two levels, and then install the lamps. Finalize finishing.

The dimensions of the two-level ceiling: How lowered ceiling

Two-level ceilings, of course, make the room at a height. But it is not always possible without loss - and when you want to install tiered structure, and not to lose the desired area. To help one time comes.

New ceiling must in this case be smaller than the core.

Two-level ceilings with niches on the perimeter walls allow you to visually preserve floor spaceTwo-level ceilings with niches on the perimeter walls allow you to visually preserve floor space

Focus on the wall with a window - turn away from her distance of 180-200 mm.

Will result in the ceiling a niche where you can set the curtains. As a result - you can hang up the old curtains, without changing the size. Visually, this also affects the perception of the room.

Marking the two-level ceiling with his hands

This phase deserves utmost concentration, because it determines the quality of the entire structure.


How to make the layout of the ceiling:

  • Take roulette and pencil, define a point on the wall that is a source code for the line (horizontal) of the lower edge of the box;
  • With the water level hyphenation points in the outer and inner corners of the room;
  • Upholstery cord between the marks make the horizontal lines;
  • Draw a line across the ceiling, which are the inner boundaries of the second level.

Thereafter, on the plane of the space, inside the perimeter of potential trunking, to draw a grid of hangers of the first level. At the intersections of the grid lines, you and fix suspensions.

Installation of the ceiling in two levels: work plan

Step by step guide will help you understand some of the steps is the frame assembly and what is their sequence.


Plan for the construction of a double ceiling:

  • Marking the mounting grid;
  • Development of the project of the ceiling;
  • Determination of the sequence of erection of levels;
  • Calculation and material procurement;
  • Transfer to the base mounting grid ceiling;
  • Spacing falshpotolka level;
  • frame assembly;
  • Gasket of communications;
  • Further cut shaped parts and are shaped curved casing (if required, such as creating a wave curve);
  • Plasterboard paneling frame;
  • Finishing the ceiling;
  • Installation of lighting and ventilation.

Very often there is a dispute, what is the level of the first mount. It's simple, if the second level of the area is not great, going first frame of the first level, and have him hanged frame of the second tier.

Priority frame mounting under the drywall ceiling depends on the size of tiersPriority frame mounting under the drywall ceiling depends on the size of tiers

If the second tier extensive, it must be mounted on the first elongate hangers, and only between the elements of the second level need domontirovat first frame.

Designer two-level ceilings: how to choose

One option common today - is the combined ceiling. On the main perimeter of the need to pull a sheet of fabric or PVC fabric, and on the sides of the box to mount the plasterboard. It is often used in this embodiment ceilings with photo printing.

The combination of PVC fabric and plasterboard ceilings to create split-level - a fashionable destination for all types of premisesThe combination of PVC fabric and plasterboard ceilings to create split-level - a fashionable destination for all types of premises

If we are talking about the design of the ceiling in the studio, the ceiling must be done with the transition, which would zoned space. Transitions can be defined split-level ceiling or using different colors.

Do today ceilings, which are connected with niches and shelves, and even with a decorative staircase.

As for colors, there is always relevant White + Bright. A clear and may be natural, saturated color, e.g., purple or turquoise.

Installation of the two-level ceiling of plasterboard (video)

Square and rectangular, classic and original, with a play of light and color - two-level ceilings today is more than decoration in the upper room. They chained the attention to the interior and serve as a link between its elements.

The design of the two-level ceiling of plasterboard (photo)

wr-720sh-18 The construction of two layers: two-level ceiling of plasterboard 0d8441520d541bXL 050114b978dec1orig 13-2 1bd037a26b883aead133df9598ffc2af 14 14-1 20 310

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

+ 4 = 7

map