Terms of needlework: how to fasten a thread for embroidery stitch

Terms of needlework: how to fasten a thread for embroidery stitch

12 October 2017



The ability to cross stitching will allow you to decorate the original old things and update the interior of the apartmentThe ability to cross stitching will allow you to decorate the original old things and to update the interior kvartiryVyshivanie cross - process no matter how exciting, so and time-consuming. No wonder many are deceived, believing that it is necessary to learn how to read diagrams, and then everything goes by itself. But in embroidering many nuances, not one way to have to learn to truly master the crafts.


Cross Stitch: the right fastening thread

Be sure when you need embroidery thread very carefully and, of course, firmly fixed inside stezhochkov. This is necessary to ensure that the embroidery was the most accurate, it was rovnenko, had bumps and, of course, when washing is not dissolved. And in the process of sewing thread can cling to the nodules, which, naturally, is impeding.

If you are embroidering an even number of strands, it is useful to you the first way. For example, you have to embroider a picture in the two strands. For this purpose, you need to take an ordinary otrezochek thread but its length must be twice the one that you usually embroidering. You fold it in half.

Properly fixed thread - the key to success in creating an embroidered patternProperly fixed thread - the key to success in creating an embroidered pattern

Then you insert the thread in the needle so that the eye of the ends have been cut, and thread on the end was solid. It turns out that at the beginning you enter embroidery needle from the inside, but do not pull the whole thread on the front side, petelechku hold.

You needed to bring the needle close to the wrong side, and then vdet it into a loop. Here you have left only to tighten the noose, and continue embroidering scheme. As you can see, nothing complicated - so you can fix the thread first method.


A simple cross-stitch: the fixation threads at the beginning

Let's say you do embroidery in one thread. This method is suitable for fixing at the beginning of an odd number of threads. In this case, the start will be harder to fix. But still have to strengthen the thread.

When cross stitching thread must be attached properly in the beginning, or the middle of the thread breakage may occurWhen cross stitching thread must be attached properly in the beginning, or the middle of the thread breakage may occur

Thus, the process is as follows:



  • You threading a needle, thread are missing 3-4 square canvas;
  • Thereafter, vertically, and then horizontally under puncture the central threads of each square - we can say that the thread will go barely prominent snake;
  • When the top you will cross stitching, the thread end you securely hide and thus finally secure it.

Well, on the tip of leaf strings you need to stretch namitka under the vertical thread along a single row of canvas.

cross stitch Rules: how to fix the thread at the end, a sure way

When quality embroidery, as is known, on the underside of nodules should not be. The thread can be fixed in such a way - from the inside to enter the outline of a needle and thread, then tighten the thread, and the reverse side leave the tip in a half centimeters in length. Thereafter, while holding the finger from the reverse side, proceed to the desired embroidery portion. Then roll over the hoop in the residual thread vdevaetsya needle, and this thread is held under stezhochkami made of the same color.

After the completion of the painting must be accurately and firmly fasten the thread, so as not to spoil the embroideryAfter the completion of the painting must be accurately and firmly fasten the thread, so as not to spoil the embroidery

loop method is considered to be the most economical. In the eye of a needle inserted into a folded thread, but do not bend, and tips. The needle is inserted into the fabric so that the fold was a thread on the wrong side, like a loop. After this is done the stitch, the needle is passed into the resulting loop on the wrong side, the thread is tightened, and you continue to embroider on.

If embroidery is often blurred, of course, considered to be the most practical method loop. When the embroidery thread ends, the tip of her often hide on the inside, under the stitches. Watch the video examples, and you will understand, in any case which option optimal.

How to fix the thread when sewing the cross (video)

Many ways, choose the one that more is convenient to you. Try each, and figure out which requires less power, or just some manage to you very well.


Good luck in the works!

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

6 + 2 =

map