Solutions to the question: what to decorate the ceiling in a private house
AT The choice of ceiling finishes in a private home richer than kvartirenutrennyaya furnish private homes is almost the most difficult job in the course of the entire construction / repair. But the interior - this is embodied in the reality of the design project. Very often finish begins with the ceiling.
What do the ceiling in a private home: suspension structure
This device is one of the most popular. This design allows the ceiling does not equalize the rough ceiling, as do suspension structure, which, moreover, in the ceiling space can hide all communications.
The construction itself - it's just a box, the basis for which the need is still the optimum finish. Options standard - a plaster / paint or wallpaper pasting. Modern ceiling can be combined: the gypsum plus box stretched canvas.
Of course, the height of the room suffers from any pendant design, especially if we are talking about multi-level ceilings. But as in private homes usually high ceilings, there is a sense zateivaet installation.
Combined ceiling plasterboard ceilings can hide all the flaws and irregularities ceilings
Stages mounting structure suspended drywall
- Preparation of the base ceiling. The ceiling should be checked for strength, if the finish does not crumble and does not fall, then the repair can be continued without any alterations. If the plaster fray, for example, that some shortcomings have to be addressed.
- Installing metal frame. Previously, the construction of the frame used wooden slats, today to build the framework needed metal profile. To set the frame used for ceiling and guide profiles. The guides are mounted along the wall, and the ceiling directly to the ceiling.
- Finishing drywall. The framework is necessary to sheathe. First, whole mount plasterboard. Attached to the frame with screws are black.
- Sealing of joints between sheets. Usually on them (in the joints) is applied to the tape-serpyanka, and then the surface puttied.
- Finishing. How to make better - a matter of taste. Usually it is a painting or wallpapering.
Here is the standard scheme. And though itself drywall constructions "eats" the height, it can even visually enlarge the room, especially in the succeeding multi-level ceilings.
Types of ceilings in a private house: wooden paneling
It is logical that the natural materials will look more organic in a private home. Here the options what to decorate a lot.
Wooden ceiling trim - is:
- Board siding;
- Rack bar;
- Suspension design wooden structure.
The most popular option - wall paneling. It is a planed thin wooden board, which on one side has the groove, with another - a crest. Comb is inserted into the tongue and so is going to shield.
Molded - the most democratic material for finishing the ceiling
Since the solid wood has the ability to respond to temperature and humidity extremes, the seams between the planks, too, can then be compressed, then expand. These joints often emphasize rounded or beveled.
Wall paneling can be thick and thin, narrow and wide. Sometimes it is a simulator of round logs.
ceiling insulation technology in the private house
Before finishing are plenty of steps, one of which - insulation and vapor barrier. Do it right, and finishing will be nothing in the way.
If the ceiling is not insulated, then the warm air rising up, will not stay in the room
Features ceiling insulation in a private home:
- Insulating layer can be laid in two ways - rack, and with the help of the construction and installation of a stapler;
- The ideal material for insulation - mineral wool, it is better than concrete block, fiberglass and foam retains heat;
- Mesh ceiling overlap assumes that the insulation should be flush with the beams;
- Very carefully need to lay the insulation in the chimney area (as in a private home, he often passes through the attic space;
- If we talk about the mineral wool, putting it in several layers, the middle of the plate first layer of wool should be at the junction of slabs of mineral wool second layer;
- Insulation glassine layer is normally closed, and further attached sheathing.
It is worth noting that if the house has an attic, the space that is in the region of its ceiling and floor, warm is not required. And to enhance the soundproofing, the void is filled with sand and sawdust, which are mixed with the mortar.
Mold on the ceiling of the new
Mold on the ceiling - it's not just not aesthetically pleasing and unpleasant, it is also harmful to human health. To mold did not appear at all, you need to control the level of humidity in the house.
Often this ventilation problem. If it does not work properly, replace, install new or additional.
It is also important to know about mold:
- Dry the room, open windows and doors;
- Plastered on the ceiling smooth out the affected area and this place is sure to treat with antiseptic;
- Get rid of the mold need special tools, which are designed precisely to address this problem;
- Is first treated with a sponge mold section with a solution, then it is washed off, cleaned and left to dry;
- Well, then in the course are the primer, putty and paint with special anti-fungal additives.
Mold can cause considerable damage to health, especially for children. Hence it is necessary to deal with any fungus formations on the ceiling and walls in all possible ways
If you made a plasterboard ceiling, it is not worth bothering with ends and zamyvkoy gypsum board. Simply remove the affected leaves and replace with a new one.
But in wet areas where is not rare and condensation and dampness, hem to the frame need special moisture-resistant gypsum board.
Wooden slats in the design of a private house ceiling
New ceiling, you can not just cover the base ceiling, but also to create virtually any design project.
So in a private house the power load on the ceiling surface - it is only their weight, are used for the finishing of both natural and man-made materials. Since the wooden houses special attention paid to maintaining humidity and temperature conditions, the best option finishes are all the same wooden slats.
If the slats are taken, not the best quality, the front of each part can be sanded. To do this, of course, better than before to raise the rail on the ceiling and fix it there. Simply put, bring the rack in proper form before they sew up the ceiling.
But already finished rack in the usual way is nailed to the sheathing. Note that the nail heads should be visible. Decorated in such a way toned ceiling first, then varnished.
Ceilings in a private home in an eco-style with their own hands
Eco-style development has become relatively recently, at the end of the last century, but today it is experiencing not just the active development and any new round is held. Becoming popular only natural materials, in everyday life people refuse plastic, polyethylene, and abundances, etc.
People even refuse to concepts such as, e.g., a boiler or gas heating, and heating resorting to alternative embodiments. This solar and wind generators, heat pumps, etc.
Design options ceiling in Green Buildings:
- Wallpapers of jute or bamboo - not the standard, but very interesting solution;
- Sheathing lining - the easiest, a compromise;
- Gypsum ceiling - an eco-friendly material, most importantly, do not overdo it with the finishing.
Nowadays, more and more in the interior of the house uses natural materials, the first of which is the tree
Eco-style in general emphasizes the tree - up to accessories. Well, color is of considerable importance, prefer green and brown, they will most organically this style.
Finishing the ceiling in a private home (video)
Ceiling in private house requires no less of finishes than the ceiling of the apartment. Perhaps its design should be more natural, less bright than the ceiling view of the apartment. However, choose the option that will not vary with the overall style and the concept of space.
How to decorate the ceiling in a private home (photos)