Set the doorway of plasterboard with their hands
Quick and easy enough to transform the interior of the room is possible by means of gypsum door proemaIzmenit plan, or divided into separate rooms existing premises there is no difficulty. This can cause a team to repair professionals or do everything on their own, subject to the availability of certain knowledge and skills. Most often used for interior partitions doorways of plasterboard. The installation process of this design must be attention to detail, since this determines its quality and stability.
How to make a wall of plasterboard with the doorway alone
Quality and practicality of the drywall to use proven long ago. It is used not only as a material for the walls, but also as the foundation structures and partitions that divide the room into several rooms. Each wall should have a hole under the door, which greatly complicates the installation process. It is important to remember that doorway must have a certain rigidity to it in could put the door frame, facing materials, slopes. If you did not originally planned availability of the door, in the future such a need may arise. Qualitatively mounted doorway allows to mount the door without too much trouble at any time.
Before installing plasterboard wall and doorway are kindly requested to make a frame layout
The process of installing plasterboard walls:
- Marking the frame;
- Installation of carcass;
- Wall cladding with plasterboard.
At the beginning of the work we need to draw a plan of the walls in order to avoid defects and further tinkering. Future doorways and width of the walls should be marked on the drawing. The first stage of the installation wall is to transfer all the elements of a plan for the floor and ceiling of the room.
The presence and location of wiring and appliances should also think in advance.
To install the mounting frame is made of metal guide profile, which serves as a partition loop. Fixing is carried out punch or dowel-nails. Further mounted vertical rack profiles, whereupon the frame is filled with soundproofing material and stitched sheets of plasterboard.
How to install sliding doors in plasterboard interior walls
Sliding doors in the plasterboard wall occupy little space and are ideal for small spaces.
Nice and modern sliding doors drywall will look in the interior
To install this door will need to conduct the following activities:
- Calculate the height of the mounting rail and the size of the opening;
- Assemble frame walls;
- Install door guide;
- Set limit stops;
- Run trim frame plasterboard;
- Perform Grinding clean floor;
- Hang the door leaf;
- Install trim.
When setting the metal frame used jumpers which connect the wall of the structure to increase the rigidity. double vertical racks are also installed, as in space, where there is a hidden door to put the jumper is not possible.
Set the doorway of plasterboard with their hands
Door openings are executed by the guide profiles at pre-designated markup. The size of the door unit greatly influences the final width and height of the opening. Before calculation of height of the opening should pay attention to the absence or presence of a floor covering.
The shape and size of the plasterboard doorway, usually depends on the size and characteristics of the design space
The process of mounting walls of plasterboard with the doorway comprises the following steps:
- Installation guides and rack profiles;
- Partitioning and forming the structure of the doorway;
- Fastening gypsum boards on the final structure of the doorway;
- Installation box of drywall duct.
Before the start of finishing work is necessary to check the wiring. To improve insulation must zapenit gap between the profile and boards.
Stands on the edges of the doorway strengthened the bars of wood that fit the profile size. The presence of a piece of wood significantly improves the quality of the door assembly in a partition with plasterboard with their hands, but also improves the rigidity of the structure. For fastening to profile rails are used self-tapping screws.
How to make a door made of plasterboard with their hands
The process of manufacturing and installing door plasterboard is not complicated, but the final result depends on the design planning.
Mandatory step in the installation of the door opening of the drywall is planning construction
During manufacture of plasterboard doors, perform the following work:
- Install the door frame;
- Sheathe the crate door;
- Seal cracks;
- Conduct ground and bonding agents work;
- Hold a final finish walls.
For framework used sliced profile to which are attached the jumper to increase the strength of the product. The frame is sheathed with plasterboard any size and even the remains, because the finished fabric in the end gives in coats and putties. All the cracks and chips, which are the result of skin must be qualitatively repaired. After that the painting or taping the door photo wallpapers, tiles.
In some cases, a structure with foam insulation doors, glass wool, with foam, izolona or polystyrene, wherein the material is laying in the empty space, and fixed with adhesive.
In what order established a plaster board wall with door
To isolate the entrance of the room interior walls can be used, for which a material with different characteristics: moisture resistance and fire resistance.
Since the material is very fragile, to work with him to be careful and carefully in order to avoid damage.
In order to avoid damage and to establish the opening correctly, the repair work must be performed carefully, paying attention to the smallest details
Stages of installation of interior partitions:
- Preparatory - collection of measurements, cooking materials and tools;
- Mounting - the profile of the installation process, the formation of the opening under the door, and drywall installation;
- finishing - surface treatment and various wall impregnation, application of paint, tiles, wallpaper.
Immediately prior to the installation of the door need to divide the material into separate elements of pre-marking boundaries. Line cut should be aligned in a flange plane. The frame is sheathed with plasterboard on both sides using screws.
How to sheathe plasterboard doorway correctly
Before the wall sheathing must be properly cut sheets of drywall construction with a knife. To obtain smooth boundaries sheet should be placed on a horizontal surface and a solid marker line mark along which the material to be separated. The upper layer of plasterboard by slightly incision. Thereafter, the sheet is shifted to the support edge and been broken and. In the end it is necessary to turn over and repeat the above steps again, with the result that will be separated from the desired piece of drywall sheet.
Experts recommend choosing quality gispokartonnye sheets to obtain a reliable and robust design
The sheet and frame are connected by means of screws. Initially necessary to fix the edges of the sheet, and only after that the middle. Between the fastening parts should be maintained within a distance of 10 to 25 cm.
It is important to completely screw the screws in drywall to the wall above the level of the cap is not sticking.
Work carried out in the following order:
- Securing the first sheet is held;
- The distance to the ceiling and drywall cut piece of appropriate size;
- In places where it is necessary to fasten a sheet or other piece of drywall ceiling, it is necessary to form a chamfer;
- After the first row of set sheets under the entire ceiling, and fastened to the bottom of the missing part.
How to mount the doorway of plasterboard
During the redevelopment apartment is very popular solution to finish doorway drywall. In this case, it does not necessarily make rectangular. Now in vogue unusual and krivougolnye doorways and using drywall became real to realize any design ideas.
Gypsum doorway will stylishly and beautifully decorate almost any room
At the beginning of the work necessary to remove the old door removed from its hinges and remove the casings, jambs on the floor.
Installation of doorway drywall made in several stages:
- Installing rigid frame for fixing the shell plates;
- Setting the upper transverse rails for fixing the upper size of the opening;
- Measurement parameters box by width and height of the doorway;
- Preparation of materials for the installation of the doorway and sound insulation;
- Marking drywall;
- Fixing the sheets of drywall on the screws;
- Pasting seams ribbon serpyanku;
- Putty and primer doorway;
- Final decorative trim.
Doing their own hands doorway of plasterboard (video)
Doorway of drywall can be a highlight properly sized design. Dividing wall with door coupe is particularly relevant in a modern interior. The main advantage of this design is the ease of assembly. This eliminates the need to pay for the installation of the wall and the training material, as do it yourself very easily.
Making doorways of plasterboard (photo in the interior)