Select and install perforated ceilings

Select and install perforated ceilings

12 October 2017



Perforated ceiling looks great in any roomPerforated ceiling looks great in any pomescheniiPotolki perforated - unoriginal and interesting design solutions. In most cases, uses perforated panels made of PVC, since they have a low specific gravity and are cheap. Alternatively, one can apply cluster materials or perforated plasterboard. Before the roof lining is necessary to clean the surface of the base and build a solid frame of the profiles.


How is the mounting of the perforated tray to the ceiling

Perforated trays are used when necessary to lay the cable route. Perforated sections to help take excess heat. Such trays are made of plastic or galvanized steel. Sometimes used in stainless steel products.

If you need to lay a cable route, then you should use perforated traysIf you need to lay a cable route, then you should use perforated trays

Mounting the tray to the ceiling can be carried out using:

  1. Punched tape. This method is the easiest. By using the punched tape tray is fixed by screws. Remember that paper tape tears easily under the influence of a large load, so it is inappropriate to use if the tray has a large proportion.
  2. Brackets. This mounting method is the most reliable. Furthermore, when using the tray brackets can be fixed in any position.
  3. Studs. This method is advisable to use, if you are going to spend a large amount of wiring. When using pins must install aluminum profile.

When using the bracket need to necessarily use the anchor. They give structure rigidity.

Installation perforated ceiling cassette

Cassette perforated panels are widely used because they are easy to install and long serve. In addition, before installing this design you do not need to align the reference surface.


Remember that the suspension cassette design is extremely cumbersome. When using this material, ceiling height reduced by 20-25 centimeters. It is therefore inappropriate to use cluster panels for dressing rooms with low ceilings.

If you are installing the ceiling cassette, do not forget that the ceiling height is reduced by about 25 centimetersIf you are installing the ceiling cassette, do not forget that the ceiling height is reduced by about 25 centimeters

Mounting cassette perforated ceiling is done in several stages:

  • Initially, you need to put on a base surface markings and install trim profile.
  • Next, attach the suspensions. If spring suspensions, the fastening eyelet should be reduced. Remember that in order to secure the hangers should be used metal anchors. In places where there will be installed lighting, it is necessary to carry out additional mounting hangers.
  • Set the basic and intermediate guides.
  • Then it is necessary to sheathe the resulting frame plates. To do this, gently vdet cassette into a cell, and gently rotate it. As a result, you should get a perfectly flat perforated surface.
  • Install lighting fixtures and decorative moldings.

How to install a plastic perforated ceiling

If you have a low ceiling, it is best to use a plastic perforated panels. They cost a little bit cheaper than the cassette material, however, PVC panels wear out faster.



Before starting the installation, you must thoroughly clean the ceiling of the whitewash. It is also recommended to treat the surface of the base solution and antifungal hold wiring.

Before installing the plastic perforated ceiling is necessary to clean the surface of the underlayerBefore installing the plastic perforated ceiling is necessary to clean the surface of the underlayer

Installation Technology perforated plastic ceiling:

  1. Apply to the ceiling layout according to which you attach the starter profiles.
  2. Secure the line trim.
  3. Set L-shaped profile. It must be mounted on a special bracket, and secure with screws. It is worth noting that it is better to use metal profiles, as they are more durable than wood.
  4. Do the panels in hole lamps.
  5. Then proceed to install the perforated plastic panel. The first panel is attached by means of screws. All other panels must be secured to the rail profile.
  6. The last panel to be inserted in the profile of the L-shaped configuration.
  7. Install lighting fixtures and decorative moldings.

Install perforated plasterboard ceiling

Perforated panels of plasterboard appeared in the construction market relatively recently, but already well-proven. Fasten such panels on a special metal or wooden crate.

Before starting the installation, you need to remove all the defects on the surface of the base. To do this, use a putty. It is also recommended to apply primer to the base surface, deep penetration.

Before installing the perforated gypsum board ceiling is necessary to remove all the defects on the surfaceBefore installing the perforated gypsum board ceiling is necessary to remove all the defects on the surface

Mounting perforated plasterboard panels is performed in the following sequence:

  • Perform the wiring.
  • Set around the room guide profiles. We recommend using a perforated metal trays.
  • Further it is necessary to mount the ceiling profiles.
  • Proceed in the drywall holes for lights. If you are using an LED strip, then you do not need this.
  • Then obsheyte frame gypsum boards. recommended to use screws for fixation of the material.
  • If desired, can be coated on drywall acrylics.
  • Install lighting fixtures and decorative moldings.

How to mount a perforated ceiling (video)

For the construction of the ceiling is best to use perforated plasterboard. This material has a low specific weight and high performance. Alternatively, cassettes can be used, made of aluminum or stainless steel. If your room is lower base ceiling or you have a limited amount of money, it is better to use perforated PVC panels.


The design of the perforated ceiling (photo interiors)

3-3 3a47b3528bccafca20c2e3bb4fa38102 5c 007-1414412913 7 8 14-1414412913 16 16 20

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

7 + 1 =

map