The Blog



The main purpose of roof ladders - to ensure human security, carrying out maintenance work on the roof of the buildingThe main purpose of roof ladders - to ensure human security, carrying out maintenance work on the roof zdaniyaSovremennye roofing ladders can be made of wood, metal, aluminum. The main demands of the guests is human safety on the roof. With these stairs, a person who is on the roof can hold the balance and get to the desired area of ​​the roof.


Metal roofing ladder: classification ladders for maintenance of the roof

The roof ladder is needed to secure uplift on the roof and immediately move on it to carry out certain works.

Depending on the metal and destination, ladders for maintenance of the roof can be divided into:

  1. pristennaja;
  2. attic;
  3. Pitched.

On the type of ladder depends on its location: near-wall is located outside the house, attic - insideOn the type of ladder depends on its location: near-wall is located outside the house, attic - inside

Pristennaja ladder (L-455h1860) - vertical, it provides a secure ascent to the roof. Lower step shall not be higher than 1 meter from the ground, and by the upper bar must be flush with the projection of the roof. Basically multideck external staircase is made of metal or aluminum profile.


Attic stairs located inside the home and is necessary for a safe exit to the roof. On the roof you can get to the attic. On the attic space are hatches, to which you can attach this ladder. They can be folded or disassembled. Rarely operated ladder can be put into the pantry, and will not be difficult to get it if necessary. For the manufacture of such ladders used as wood and metal.

Pitched stairs located on the roof and give access to the required sites - damaged flooring, garbage, chimney, etc.

Pitched and wall ladders Grand Line are among the most reliable and secure roof ladders.

Ladders for roof mounting: combined roofing ladder

As already mentioned, the roof - the most dangerous place for work. For your safety you need to have a roof ladder, which will provide a reliable lift upward. Also stairs protects the roofing material. If the roof is covered with corrugated roofing sheets or slate, it can be damaged by walking on it.



Roof ladder can be combined and consist of the wall and a sloping portionRoof ladder can be combined and consist of the wall and a sloping portion

To jump to a specific section of the roof, roof ladders used the combined type. These include the near-wall stairs and sloping. This versatile ladder allows you to climb to the roof and then move on the slope of the roof, without fear of falling off it.

Now quite popular and combined stairways of a material such as aluminum. For the manufacture of high quality material is taken, steps to obtain reliable, durable, but also easy.

Coating aluminum ladders resistant to corrosion, it will not peel over time and has a good appearance.

Roof ladder with their hands: how to make a good ladder to the roof

When working with a roof, you must have a special ladder to climb to the required height, move along the roof using a ladder as a bridge. When the flat roof will fit and the usual ladder, but if the shape of the sloping - you need to use a roofing ladder. No work with the roof can not be accomplished without this device. Wooden or aluminum ladder can be purchased at any hardware store, but it can be done by hand, with a little effort.

To make a wooden roof ladder, you will need:

  1. dry board (16h2.5 mm section);
  2. square bars (40x40 mm section);
  3. screws 10 cm;
  4. nails 10 cm;
  5. rifles boards or planks (width 40-60 mm).

Stairs made of wood come much cheaper than aluminum because wooden blocks and boards more accessible than aluminum profile.

Wooden roof ladder will cost much cheaper than metalWooden roof ladder will cost much cheaper than metal


Proceed directly to the manufacture of stairs:

  1. First determines the length of the future steps. Then, from the dry long boards cut into the base of the staircase, which will be attached to the step.
  2. Of the bars will make crossbars. steps width is determined independently: the bar area, which will be standing leg should be wide enough to stand a man could sit down.
  3. Bars-stage attached to the bottom of the stairs with long nails. It is not advisable in this case to replace them with screws.
  4. You do not need to do too many steps. This will add to the weight of the ladder.
  5. Once ready the usual ladder, you need to attach it to the hook. With the help of a ladder will cling to the roof ridge.
  6. The greater the length of the hook, the more reliable the staircase.
  7. The skate is made of thicker wood bars than the crossbar, but the same width.
  8. On the stairs you can nail hooks on which it will be convenient to hang your tools.

Carry a ladder is necessary together - one person takes over the bottom of the ladder, the second support for the hook sitting on the ridge of the roof.

Roof ladder metal: advantages and disadvantages

Roof ladder metal - an important accessory for the private home owner. Sooner or later, will have to make repairs, install the antenna or cable Internet to carry out, to remove leaves or snow. In these cases, we need to climb onto the roof. Good staircase that leads to the roof should be reliable. It is such a ladder Borge stamps can be purchased at the hardware store.

Reliability and versatility Borge roofing ladders confirmed time and numerous positive reviewsReliability and versatility Borge roofing ladders confirmed time and numerous positive reviews

Roof ladders Borge has its advantages:


  1. Long service life. If the installation stairs are correct, it will serve you for a long time. Staircase coated with zinc which protects the metal itself from rust formation.
  2. Versatility. Ladders of this mark can be applied not only for use with roofs of metal, but also with floorings and other roofing materials.
  3. Security. The use of roof ladders Borge much safer than conventional wood. While working on the roof, you can use it without fear of accidents.
  4. Availability. Produced from high-quality materials, Borge ladder can be purchased at the hardware store or on the Internet.

At each step of the antiskid elements fastened to prevent falls from a height.

This ladder has virtually no drawbacks. Of the minuses can allocate a large weight and high price of the product.

Roof ladders Metallprofil: description and characteristics

Pitched ladder "Metal Profile" fit all types of roof coverings - metal tile, slate, soft roof and used for roofs of various shapes and complexity. Stairs for roofing include directly ladder on roof slope, brackets for fixing to the roof ladder, the fastening elements.

Roofing Metallprofil stairs have long proved themselves enough on the positive side and have a lot of advantagesRoofing Metallprofil stairs have long proved themselves enough on the positive side and have a lot of advantages

Pros roof ladders "Metal Profile":

  1. Long service life;
  2. Universal fixing to all types of roofing;
  3. Compliance with GOST;
  4. Friendly mounting the stairs;
  5. Qualitative manufacturing material;
  6. It is possible to choose the color of the stairs.

All elements of the ladder are certified and comply with safety standards.

As mounted roof ladder (video)

The quality of the installation of the roof ladder depends on the safety and health of people. Therefore, the installation of ladders to the roof are best left to professionals in this business.

Types of roof ladders (photo examples)

269osn 1291 1293 94ab2e50-8953-c256-4563-41855c35ce58 1826c09b57c556bb09e954c531640470 2011-03-11-165607 02042014state-32 54345345 142528489056531200 ddfd122ea5dde842654551bb9a55b334e47da0

Leave a Comment

Your email address will not be published.

4 + 4 =