Recommendations on how to hang a chandelier in the suspended ceiling
After installation of stretch ceiling, most owners have questions about mounting priborovPosle lighting installation in a stretch ceiling room, many faced with the problem of attachment to it of lighting fixtures. How to Hang a chandelier in the suspended ceiling, to avoid damaging the coating suspension? It is worth noting that its installation to the normal ceiling does not require any special skills. However, during the installation of the lighting design to Stretch ceilings should consider the types of fasteners, as well as security technology.
How to Hang a chandelier in the suspended ceiling: tips masters
It is recommended to install the chandelier was carried out in a room where there are high ceilings.
It is necessary to design the edges are not too low.
All masters are advised to correctly choose the color of the ceiling paintings, in fact because of exposure to high temperature material, the ceiling may darken or become deformed. But which model is better to choose?
Criteria for selection of lighting
When choosing lighting for suspended ceilings should consider the peculiarities of its construction
In the selection of the lamp should be taken into account several features:
- By choosing a base for ceiling chandelier design should not acquire a metal base to the ceiling is not exposed to heating.
- To prevent damage to the ceiling important to make sure that the chandelier no upward sharp elements.
- Location of the bulbs from the web should be 35-40 cm.
- It is recommended to give preference to models where there are several light bulbs with a small capacity.
When choosing a chandelier for the room with a high ceiling, it is necessary to purchase a model where there are several tiers.
Methods for installing the tensioning ceiling chandelier
There are several options for fixing the lighting fixtures to the suspension track. However, when choosing the method should take into account characteristics of the premises and the individual preferences of the owner of the apartment.
To hang a chandelier is recommended to use methods:
- Hook. Application of this method is considered the most popular and reliable solution. Wherein installation design can be carried out using a conventional hook (anchor). Sometimes a hook welded to a plate and then fix it on the coating.
- The mounting plate. Fixing by means of such a method is suitable for compact chandeliers with small size. Almost always, the plate is a component part of the acquired chandeliers. And there are special fasteners or clips.
- mounting plate - Phillips. Such attachment is often also one of the components of the lighting design of medium size.
- I-beam bar. It can hang heavy lamps or with dimensions.
There are several ways to hang a chandelier. The main thing - to do things right and do not damage the fabric tension
After selecting suitable lamps and picking up necessary fastening should take care of proper installation structure.
But is it possible to attach a chandelier on their own? It should be noted that the use of special instructions the whole process works is not a problem. However it is necessary to start the installation of the profile before making repairs to the stretch ceiling.
Installation chandeliers on the ceiling with the help of the tension hook
When the profile required for the installation of stretch ceiling is fixed, it is to attach the line.
This material take two segments, they must be fixed in opposite corners of the room and cross the middle.
The point of intersection is the place where you want to hang a chandelier.
Before you begin to install the chandelier, it is necessary to de-energize the whole room
Further work is carried out in accordance with standard instructions:
- To begin to de-energize the room.
- With the use of anchors or anchors should attach hook. It is important that the end of the items is below the fishing line.
- The next stage will be the stretching of the web. After that you should wait 24 hours, and only then proceed to further work.
- Where it is planned to fix the canvas, must be secured (need glue) special plastic termokoltso. This part is needed to protect the material.
- After drying, the adhesive should be cut in the ring hole to get the wire.
- At the last stage of the chandelier should be attached to the hook and set a cap to hide the wires.
Masters recommend to choose a ring of diameter smaller than the cap chandeliers. In fact, after setting the element corresponding to the size of the luminaire can not worry about the aesthetics.
Mounting chandeliers suspended ceiling using a mounting plate
Those planning their own hands to install the plate for the light on the suspended ceiling, it is recommended to have at least minimal skills of such installation. This is necessary so as not to damage the fabric tension.
By selecting such a fastener should be prepared in advance bars (2 pcs.), Which cross section - 25 cm 2, and the length - 30 cm.
Installation of the mounting plate can be done independently, the main thing - to do everything consistently and with extreme caution so as not to damage the suspended ceiling
Installation is carried out in accordance with the following sequence:
- The bars are attached to the base ceiling (needed dowels or anchor). If there is a large gap for the installation of fabric, you can use hangers made of metal.
- To output wires in bars must have openings. They are made using a drill.
- It is necessary to fix the point where it is planned to mount chandelier, and then begin work on the installation of stretch ceiling.
- Then you need to glue plastic termokoltso where the planned output wires. And after the complete drying of the hole is designed to draw them.
- An important condition for proper operation is considered with the deburring plate, and the grinding of all acute angles using sandpaper.
- Planck should be fastened with screws in termokoltse.
After all the necessary work should hang a chandelier and screw special cover very tightly to the canvas.
How do I attach a chandelier on a cross bar
It should be noted that fastener strips using a Phillips and when used for fastening I-beam bar is identical.
Before starting work on the attachment of the lighting design should prepare veneer whose thickness - 1-1.3 cm.
Installation of chandeliers in the suspended ceiling with a Phillips-head strap can be done by yourself, but it will require you to the utmost of care and accuracy
To install a cross bar must be:
- At the level of the future fabric of the corners of the plywood is attached, after which it is cut out a hole for the wires.
- Then, the suspended ceiling is fixed in place and the holes glued plastic termokoltso.
- When the glue dries here also need to cut a hole for the wires and then fixing is carried out with a bracket chandeliers. The work shall be completed when fixing a decorative cap.
How to Hang a chandelier in the suspended ceiling (video)
Attaching the chandelier in the room, where there is a suspended ceiling, is not a problem even for a beginner. You only need to choose the right lighting design and precisely follow the instructions, do not forget about safety rules. And often the installation work does not take a lot of time, and in the qualitative performance of their room will become a cozy and comfortable atmosphere.