Priming of walls before gluing wallpaper: a pledge of quality finishes
Priming the walls is necessary to protect the decorative cover from possible mold, as well as for better adgeziiPri repairing many concerned about the issue of the preparatory work. If the walls are decorated with wallpaper before applying them need to perform a number of maintenance procedures that will align and strengthen the surface of the walls and ceilings. One step is to wash the walls before glueing wallpaper. This is a mandatory procedure which protects the surface from formation of harmful microorganisms, cracks and voids. Run the primer can be yourself.
Do I need to prime the wall before pasting wallpaper
Surface finishing before wallpapering appropriate and necessary. To be sure of the quality of repair, that will hold the wallpaper on the wall hard and long, pre-surface finish to be performed efficiently. It includes a primer, putty and smoothing of the surface.
To repair is not necessary to do over again, primed the walls necessarily needed. The primer penetrates deeply into the cladding, eliminates small defects, thus affecting the quality of repairs
It is important to bear in mind that without a primer on the surface of the walls remain small cracks and hollows that interfere with dense adhesion of wallpaper to the wall. This means that the wallpaper on the surface to hold an extremely short period of time.
- It provides a secure grip wallpapers with a facing surface.
- It affects the consumption of wallpaper paste, thereby saving money.
- Protects the surface from breaking, fraying, the formation of harmful organisms.
Before buying a primer it is important to become familiar with its views, as well as the application of the rules on the facing surface.
How to prime the wall before pasting wallpaper
The wall primer, make sure that the wall is prepared to repair. It should not be deep cracks and depressions. If any, they should be repaired with putty. It is also important to remove dust, debris, paint and wallpaper.
Prior to papering the walls should be possible to remove dust, plaster and glue remains
Priming should be performed strictly in clothing that covers the body as much as possible. It is advisable to use a respirator, as the chemicals can cause allergies.
You also need to prepare the necessary instruments: a large cushion, a special container for the composition, the primer itself.
application quality can be checked in a simple manner. To do this, after drying the wall, you need to spend on her hand. It should not remain white bloom. Finished wall must be flat, little stick
- Divorced composition poured into a special container. Moisten it roll, squeeze out excess liquid.
- Drench section of the wall.
- Hard to reach places and corners should be treated with the help of a paint brush.
- Give the first layer to dry, and then apply a second.
How primer dries before pasting wallpaper
When priming the walls in several layers is important to know how much time to dry the surface. The drying time of the primer can be found in the instructions for use.
When choosing a primer is important to consider some factors that may affect the rate of drying surface
It is important to take into account the chemical composition of the primer, and properties of the material from which the wall is made.
- Acrylic primer suitable for all widows surface, excluding metal. Drying takes no more than 5 hours.
- Primers based alkyds suitable for coating wood, metal, plastic and glass surfaces. The primer dries from 10 to 14 hours at a temperature range of 25 degrees.
- Gliphtal primer used for coating all kinds of surfaces. It dries per day at room temperature.
- Aqueous primer used for coating surfaces of various materials: concrete, cement, wood, plaster, plasterboard. Drying time is from 3 to 20 minutes.
Each type primer has characteristics that affect the rate of surface drying. Until the mixture dries, it is possible to make preparation for the next stages of repair.
What primed the wall before pasting wallpaper
When there is a need for quick repairs, the question arises mandatory application of the primer on the walls. Many people trying to save time in the repair, make a fatal mistake.
Failure to comply with the pre-treatment can lead to premature peeling wallpaper from the walls. Then the repair will have to do again
The primer surface can save you from many troubles. It will prepare the surface, to make it durable and preserve the appearance of the wall for many years.
The reasons that should be primed surface:
- Strengthening surface prevents its destruction;
- Extend the life of the surface;
- Protection from pests.
To the primer has been reliable, it is necessary to use only high quality materials.
Do I need to be primed drywall before pasting wallpaper
Drywall - perfect for decoration. It's sleek and smooth, which contributes to reliable adhesion to the wall paintings, and also saves time in preparations.
Worth noting that the preparation of the drywall to finish - a compulsory stage of repair. An important process is primed drywall, without which Wallpapering is not a quality.
For a good result the surface to be processed twice. This permits penetration of the mixture into the wall
Benefits drywall primer:
- Strengthening the walls;
- Elimination of cracks and pits;
- Decontamination surface;
- Prevents the emergence of mold and mildew.
Drywall primer to be applied twice - before and after the filler. This will not only strengthen the surface, but it will prevent rust and its manifestation on the wallpaper.
The primed plywood before pasting wallpaper
plywood finish - a prerequisite repairs. It strengthens the plywood surface, it prevents the occurrence of cracks.
Plywood absorbs moisture, which affects its quality. Priming makes the surface water-resistant, it prevents swelling.
Primer prevents harmful microorganisms. So that it complied with all of these features, you need to choose the appropriate type and quality of staff
What kind of primer to use:
- Nitrocellulose paint;
- Alkyd paints based on olive;
- Water and acrylic paints.
Selection of primer depends on what kind of material will be used for surface finish. It is important to take into account the temperature conditions in the room, the material finishing and the brand manufacturer.
Priming of walls before gluing the wallpaper (video)
Treat the surface before wallpapering and painting required. This stage of repair work surface guarantees protection from destruction, cracking, rust and mildew and fungi. In order to prime the surface quality, it is necessary to adhere strictly to the instructions for applying the composition to the surface. It is also important to choose the right type of primer that will fit the finishing material and the surface of the wall.