Plasterboard wall paneling: 3 kinds of material
Plasterboard paneling - a great opportunity to make the walls perfectly rovnymiObshivat plasterboard walls - is the most convenient way of finishing the interior. With this material a person can own hands to align the walls and not to harm the family, because the drywall refers to a number of environmentally friendly products for the repair work.
How to sheathe the walls of plasterboard
Following the advice of experts, you can avoid the most common mistakes.
- Before starting the work necessary to prepare the necessary tools to not waste time looking for them when necessary;
- Better to explore a working wall to choose the correct method of attachment, and buy the required materials;
- Also, experts recommend to properly align the wall to avoid sagging of the material that can damage it.
Plasterboard sheets have a large number of advantages - affordable price category, this material can achieve a smooth wall surface using a small number of sheets and making not a lot of effort and skill. Plasterboard is among the most environmentally friendly material, it is allowed to use in any room, even children, because in contact with this material can cause an allergic reaction or a child can not be injured by the smooth surface.
Not to mention about the properties of water resistance and fire resistance, which allow to feel more confident in the house. Gypsum boards are easy enough to install, if it is correct to observe all the rules, it is possible to do without the services of construction companies or the master and to make such work on their own.
Before sheathe the walls of plasterboard, pick up all the necessary materials and prepare the room
If damaged, can be replaced by a specific part of the element, thus saving money. In addition to the many advantages of this material has its drawbacks - it is quite brittle, so transportation should take particular care not to damage the sheets, because they are sold in large enough amounts, and may crack in half. Also, after installing it is necessary to observe accuracy, because if damaged walls of any furniture, you may experience a small, but quite noticeable dents.
Drywall alternative in such a case is a plaster, it is worked easily when damaged without applying special effort. The second equally important drawback is the complexity and the availability of man to hidden under the communications material. If serious damage it is mandatory to remove one or more panels, and a high probability of their complete replacement after removal.
Learning how to sheathe the walls of plasterboard with their hands
Before starting work, you must first cut in the required amount of drywall, it should also take into account the place of connections, angles.
Experts give advice on the correct cutting material:
- First, you need to take a writing knife and make a cut drywall on one side;
- Then the material is bent along the cutting line;
- The last step is breaching section on the reverse side.
To create a variety of designs of plasterboard, it must be cut not directly, but in a semicircle, or do a variety of undulating parts. For such work it is best to use a handsaw, it is fairly easy, and will allow for a hassle on the design to create even the most interesting details. Experts recommend installation of sheets to stack the plate so as to avoid long longitudinal seams, because at such irregular masonry most likely cracking.
Experts recommend to mount plasterboard sheets so as to no longer been lengthwise seams
It is better to create the elements of the similarity of puzzles, tightly sostykovyvaya them together. If the room is laid two layers of drywall, it is necessary to shift the sheets so that they do not repeat the previous pattern.
No less necessary is the work of embedding the seams, because it is necessary to close the space between the plates. For such purposes the - putty mix reinforced paper tape, capable of tightly sewn slit small serpyanku strip. Using a wide spatula, which is convenient to seal the gap, you can simplify your task. Sheathe the room alone with slabs of drywall is not difficult, if in addition to tips on the correct installation and use high-quality material.
Buying it should be checked outlets and inspect each leaf for damage, wedlock bends. Particular care is necessary in the selection of materials for the nursery, even knowing that it is environmentally friendly, better make sure you have certificates of quality and compliance with European standards.
How to sheathe the walls of plasterboard: types of material
In the construction market offer these types of drywall that can become otelochnym material for brick or wooden walls.
- Sheet standard having gray - GCR;
- Moisture-resistant, green - gypsum plasterboard;
- Flame retardant, red - GKLO.
Plasterboard consists of compressed cellulose pulp, with the presence of gypsum to the role of binder. Both edges of the paper layers are tightly closed. The sheets are sold with a thickness of 16 mm to 32 mm, and are of various kinds, with a specific purpose and a different price category. All kinds of fire-resistant drywall is, they can delay the spread of fire through the house, allowing family members time to leave the premises.
Self Rooms' plasterboard wall using a metal or wooden frame is also possible, if you follow the rules and know how. For such purpose the screws. They must be in tight stuff, and good foothold. This method is more reliable, also possible to use the integrated installation of gypsum board, allowing more to properly dispose of the existing premises and give it a finished look.
Plasterboard is of several types
The use of plasterboard for walls leveling allows you to not only easy to achieve a flat surface, but also improves sound and thermal insulation of housing, it does not create dust, does not stain clothes.
One of the most important characteristics of a material such as drywall, is its ability to absorb excess moisture and release it if necessary, if the air is too dry in the room.
Instructions: how to sheathe the walls of plasterboard using adhesive
If, after the preliminary preparation of the walls, it was decided - on their own glue material, you need to take care of the main materials.
- Experts will help to calculate the right amount of glue on the premises;
- Before you start gluing, better to create a wiring plan;
- You can not close the vents, also need to cut the place where will be placed light switches and sockets.
If you sheathe the walls of plasterboard using adhesive, it is necessary to initially prepare the work surface and check the strength of plaster
The preparatory phase consists of removing dust from the walls, then you need to ensure the strength of the plaster. In the presence of the old coating, it is necessary to remove himself as such negligence will bring over a lot of problems and can repair damage. If the surface is cracked or uneven, they are subject to mandatory putty. The primer is most conveniently applied by a roller or a special brushes. Then, apply adhesive according to the instructions on the package, and sticking to it drywall.
Step by step: the wall sheathing plasterboard (video)
If the home is used the right technology, the lining will be held securely, and for a long time to please the eye.