Making the installation of PVC panels to the ceiling with his hands: the benefits and nuances

12 October 2017



PVC panels are becoming more popular because of the availability and ease of installationPVC panels are becoming more popular because of the availability and ease of montazhaV now to finishing the ceiling is used a lot of different materials and techniques. One of them is finishing the ceiling with PVC panels. This material has a number of advantages, which will be discussed below, it is quite practical, and installation of PVC panels to the ceiling with your hands can perform each. The ease and accessibility of the material makes the installation of PVC panel is quite popular for decorating bathrooms and kitchens.


Advantages of PVC panels

Of course, the PVC panels offer several advantages, which explains the popularity of this material.

It:

  • Affordable price;
  • ease of plastic;
  • Water-resistant;
  • Unboundedness shades;
  • The possibility of making the repair and installation of its own;
  • Easy care;
  • Resistance to temperature;
  • sound insulation;
  • Possibility to smooth ceiling uneven;
  • Absence of sagging joints, creates a smooth, seamless surface.

With full installation of waterproof PVC panels often made in the bathrooms. Caring for a ceiling made of plastic is also very simple, you just wipe it with a cloth, you can use any detergents, the main thing that they were without any abrasive particles, which can cause damage to the plastic panels.

PVC panels have different kinds and they can pick up for any roomPVC panels have different kinds and they can pick up for any room


Due to all these benefits professionals recommend the use of it is plastic wall panels for self-assembly.

Plastic panels are of 3 types: white, flowers, textured. First the cheapest, do not have any pattern and color, most often used for decoration of bathrooms. Colored and textured white expensive, they can be installed in the kitchen, in the bathroom, even in the bedroom and living room.

How to install PVC ceiling panels alone

First we need to calculate the amount of material for finishing. To do this, make a drawing, it is possible that you will need somewhere to cut the panel, rather than attaching them completely. It is necessary to calculate the width of the panel, choose the length, select the direction of mounting the panels on the ceiling.

At least one day prior to panel installation must be removed from their packaging and give them acclimatise.

Methods of installation of PVC panels are as follows:



  • If the ceiling is perfectly flat, the PVC panels can be fixed with a special glue directly on the ceiling;
  • Otherwise, you need to create a framework that hides the flaws and irregularities of the ceiling. Preparation of the frame - a simple matter, required profiles (they can be made of wood, metal, plastic, or made in the form of sandwich panels.)

At the time of purchase should pay attention to the surface of the panels. It should be smooth, without cracks and scratches, with two panels together should be no gaps. The plastic should be the same color, without deformation.

Installation of PVC panels on ceiling (video)

The choice of material, manufacturing and installation frame

There are several materials of construction for the frames.

It:

  • Wood;
  • Metal;
  • Plastic.

The easiest to install is a frame made of wood. It includes a rack and wooden beams. However, this framework is not suitable for rooms with high humidity.

Greater longevity different frame made of metal, it is more often used in large rooms that require the presence of a large number of lighting fixtures.

Plastic frame used in bathrooms and lavatories, it is easy to make at home yourself.

For a simple frame you need the easiest material - woodFor a simple frame you need the easiest material - wood


With the application level is determined by the lowest point of the base, on it further committed markup on all the walls. Retreating 5-6 cm, marked up another level, it will be the basis for the ceiling. Directly on the ceiling are marked points for attaching beams or profiles with steps half a meter. Marking lines are, depending on the direction of mounting panels, beams and profiles should be perpendicular. It is necessary that the joints of panels fell on the middle of the beam.

Mounting bars is carried out using screws, a frame of wood to be processed emulsions of water repellent to prevent rotting material.

The first set bearing walls along the lines of markup. Then they installed ceiling profiles. After installing the framework necessary to conduct wiring for fixtures. It is worth remembering that the lighting device involves the omission of the ceiling is not less than 10 cm.

The metal frame is used in large buildings and serve for many yearsThe metal frame is used in large buildings and serve for many years

Mounting ceiling made of PVC panels

You can highlight the main points of finishing the ceiling with PVC panels.


The procedure is as follows:

  1. Calculate the number of panels, choose the color of the panels, to buy material and allow it to acclimate;
  2. Create markup manufacture and install frame (if necessary);
  3. Install wiring, if necessary;
  4. Attach PVC panels using a special glue, staples or screws. If they are attached to the frame, it can also be mounted with glue, staples, screws. Next, attach the corners.

After fastening the frame, make sure that it is perpendicular to the panels. To do this, set the profile as close as possible to the wall and secure.

Installation of PVC panels does not require a lot of costs, and the process is quite uncomplicated and fastInstallation of PVC panels does not require a lot of costs, and the process is quite uncomplicated and fast

Panels should not be inserted until it stops, and strongly tighten the screws, otherwise they might be deformed by temperature fluctuations in the kitchen or in the bathroom.

Installation of last panel PVC ceiling

During installation of the ceiling panels may have some difficulty with the last panel mount. On the one hand, you can flip the strip and prune it at length to the required size, then tightly fasten to the previous panel and secure. If you are using collapsible baseboards, it is much easier and safer to just cut the plinth to the width and to bond with the previous strip.

If the tiles are not the right size - it is easy to cut with a knife stationery and bring to the required size.

It is worth remembering that the panels and PVC skirting boards - very fragile, even the slightest bending or pressure can damage the material. Treat them must be carefully and accurately.

In conclusion, we can say that PVC panels - affordable and easy to use finishing material, which is ideal for kitchens and bathrooms, thanks to its properties, resistance to moisture. Caring for panels as easy, simply wipe them with any detergent. Set PVC panel by virtue of any person, the main thing - carefully handle this fragile material.

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

+ 31 = 40

map