Installation of lighting in the ceiling with his hands

Installation of lighting in the ceiling with his hands

12 October 2017



The choice of lighting in the ceiling large enough, but it should pay attention to the height of the room and its interiorThe choice of lighting in the ceiling large enough, but it should pay attention to the height of the room and its lighting intererKakie best to use? Undoubtedly, the best choice will be the spotlights. They are very compact and fits well into the interior, and are easy to install. If your apartment has high ceilings, you can use the overhead light fixtures or the light bulbs. The recommended special LED belt as auxiliary lighting.


As to the room ceiling height of 4 meters attach the filament lamp

Spot lights with incandescent bulbs are used very often. These products have a low cost. A significant disadvantage of incandescent lamps - short life.

If the ceiling is decorated with plastic panels, it is recommended to buy spotlights, which are equipped with special termokoltsom. Otherwise, the plastic may deform by heat.

If you fix the bulb on the ceiling with plastic panels, be sure to choose fixtures with special termokoltsomIf you fix the bulb on the ceiling with plastic panels, be sure to choose fixtures with special termokoltsom

incandescent mount technology on the ceiling height of 4 meters:

  • Install lighting box.
  • Route the cable lines.
  • Do the panels in hanging holes for light fixtures.
  • Remove the cable from the resulting hole and connect it to the lamp.
  • Insert light back into the hole and tightly fix.
  • Check the operation of the product.
  • Install termokoltso.

How to Hang a bulkhead on the ceiling

Overhead lights hang hardest. However, such lamps look presentable and consumes small amount of power. In addition, the bulkhead is more durable than conventional incandescent lamps.


To install the bulkhead you need to find a suitable power supply. It is recommended to use a high quality device may otherwise occur "strobe effect."

Before you hang on the ceiling surface mounted luminaire, Choose the suitable power supplyBefore you hang on the ceiling surface mounted luminaire, Choose the suitable power supply

Installation of overhead fixtures on the ceiling is done in this order:

  1. Disconnect the power supply.
  2. Drill holes under the mounting plate.
  3. Pull the wires.
  4. Then you need to install the mounting plate and fix it with dowels.
  5. Attach contacts to the lamp cable.
  6. luminaire housing put on lugs disposed directly on the mounting plate.
  7. Tighten the screws.

How to install the lamp on the ceiling with his hands

Hang the lamp on the ceiling with your hands will help you a special step by step instructions below. Before you start obzavedites necessary materials and tools. You will need a voltage indicator, hook, hammer, hammer, Phillips head screwdriver, fixing materials (plugs and screws).



Before starting the installation, you need to turn off the electricity. It is also recommended to isolate the wiring. It is better to use a corrugated fire-resistant materials.

Before installing the lamp on the ceiling, you must first turn off the electricity and isolate the wiringBefore installing the lamp on the ceiling, you must first turn off the electricity and isolate the wiring

Installation of the lamp on the ceiling is carried out in the following sequence:

  • Attach the hook to the base surface. Remember that it should be placed in the hollow-core slab part.
  • Drive a screw into the ceiling. Do not forget to fasten the bracket.
  • After you attach the hook to the ceiling, insulate it. You can use adhesive tape or conventional tubing.
  • Drill a hole in the wall.
  • Drive a screw into the wall.
  • Then, using the voltage indicator measure the voltage on the wire.
  • Attach the lamp to the hook.
  • Next you need to connect the wires to the lighting device.
  • Install the lamp and turn on the machine.
  • If the structure is working correctly, and the lamps do not flicker, set the decorative elements.

How can I make the ceiling lighter

If you want to make a ceiling lighter and achieve visual increasing the room, use translucent PVC panels. If you decide to use a translucent ceiling, you will need to choose the appropriate lighting. We recommend using LED bulbs. They must be installed between the tension blade and the base surface.

Advantages of translucent PVC ceiling:

  1. Durability. PVC panel with translucent texture will serve you for at least 10-15 years.
  2. Moisture resistance. In addition, the surface of the panels of polyvinyl chloride is not going to mold or fungus.
  3. Easy installation.
  4. PVC panels are completely safe for humans.
  5. Ease of care. Translucent ceilings sufficient to occasionally wipe with a damp cloth.

With PVC panels can be made lighter than the ceiling, as well as to achieve visual increasing the spaceWith PVC panels can be made lighter than the ceiling, as well as to achieve visual increasing the space

Translucent panels fit perfectly into the design of any room. If you want to recreate the unique design, it is possible to establish a two-tiered ceiling. First, necessary to lay opaque coating, and the translucent panel on top of it.

Fixing point to the ceiling lamps

As the light source can be used spotlights. Their mounting is carried out quickly. In addition, spotlights fit well in any room.

It is very important to choose the appropriate cable. If the ceilings are finished with drywall, you can use an ordinary two-wire cable. If the ceiling is decorated with plastic, it is best to connect the wires type RKGM.

Fixing point lights to the ceiling - a process that does not require much time and effortFixing point lights to the ceiling - a process that does not require much time and effort


Technology installation of spotlights:

  • Disconnect the wires.
  • Then pull the wiring.
  • Do the panels in hanging holes for spotlights. Note that the diameter of the prepared hole should be 4-5 mm greater than the diameter of the front of a point of the lamp.
  • Secure the spot. To do this, gently bend the bracket, and insert the lamp into the hole. If the luminaire is installed fasteners-hook, then make sure that the power cable is not caught under them.
  • Next you need to connect the lights to the junction box.
  • Install termokoltsa.

How to make a ceiling backlit own hands: step by step guide

If you wish to make an unusual luminous ceiling, you will need special lighting. It is best to purchase an LED RGB-tape. Such lighting attached to the ceiling simply. You only need to properly connect the ribbon, and choose the right adhesive solution for its fastening.

In order to formalize the ceiling LED tapes, you need to carefully remove the adhesive mortar on the back side of the product. Then, the tape must be applied to the ceiling molding and press slightly.

Make a ceiling with lighting is pretty simple: You should properly connect the ribbon and choose the solution for its fasteningMake a ceiling with lighting is pretty simple: You should properly connect the ribbon and choose the solution for its fastening

When installing the LED strip is necessary to take into account such nuances:


  1. If you need to shorten the tape, then cut it in specially marked places. Otherwise, you can compromise the integrity of the structure.
  2. To join multiple tapes to each other, use the LED-connectors.
  3. If you fix the LED strip to the metal ceiling, then be sure to use some insulating material.
  4. In order to properly assemble the structure, you need to stock up on a good power supply. Remember that the product must be a large supply of power, otherwise it can burn.
  5. Even before the tape will be attached to the plinth, you need to check its polarity.
  6. Instead, the adhesive solution is better to use a self-adhesive film.

How to carry out installation of lighting on the ceiling (video)

Installing the ceiling light - a simple process. The main thing - to observe a certain algorithm when installing the product. The best use of false or LED spotlights as lighting. You can use the RGB-LED tape for additional room lighting. If you have a limited amount of funds, use incandescent lamps for lighting the room.

The lighting on the ceiling (photo in the interior)

1-lighting 1yhjm2 2 6 98f6a8885b170fd0e61566239e5eb5cf 259970 12570original 913837 1475214030tochechnye-svetilniki-na-potolke 1279638210-mr-chou-16

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

6 + 2 =

map