Installation of heated ceiling with his hands
Installation of the warm ceiling - it's not the easiest, but do the job on their own people very realnoMnogie insulated walls and floor with the help of infrared panels. However, in recent years increasingly heating device is mounted on the ceiling. Mounting of the ceiling panels are substantially similar manner. Set design their own hands can be as long as you properly treated surface and choose the best materials.
Warm ceiling: operating principle and finishing
When the panel power begin to warm up and release heat to the surroundings. After a certain period of time starts to heat the air.
When installing ceiling warmer it is necessary to use a thermostat. He will automatically adjust the temperature in the room. In addition, the thermostat will prevent the system from overheating.
Film electrical ceiling operates in the same manner as floor heating
Warm ceilings consist of:
- Fastening materials. Selection of a particular product will depend on many factors. If the ceiling paneling such as Armstrong, it is better to use U-shaped hangers or baguettes.
- IR panels.
- Thermally reflective layer.
After mounting the IR panels need to use a finishing material. It is recommended to give preference to gypsum-based materials. Perfectly suited plasterboard. It should be noted that it is necessary to compulsorily cover heating fuser special non-combustible material. If you do not want to use a mixture of plaster, then you need to reduce the capacity of the heating system.
Warm water ceiling: the benefits and features
Infrared warm ceilings today are relevant. This method of insulation is very practical and durable. Water electric ceiling decoration suitable for private houses from the beam, and for the decoration of apartments. However, it is not recommended to use such a system in the premises of small dimensions.
Using such a system in your home will be warm, but not stifling.
Unlike other heaters, radiant ceilings do not desiccate the air. This feature allows you to choose the optimum air temperature in the room
The benefits of warm water ceiling can also be considered:
- Easy installation. Installation can be done in a matter of hours. The main thing - do not neglect fire safety equipment and follow the instructions.
- Quiet. Warm water ceiling heating systems are better than others, as they do not create noise and vibration during operation.
- Materials for warm water ceilings are made of environmentally friendly materials.
- Water ceilings are not able to harm the health, because it does not emit harmful radiation.
- Water ceilings are not prone to fire.
Set a warm electric ceiling
Installation should start with the selection of suitable materials and the calculation ceiling heating system. During calculations lean on the dimensions of the room. Remember that the power consumption of IR films must not exceed the power consumed by the thermostat.
In order to heat dispersion, we must properly be insulated room. As the thermal insulation material is recommended to use foamed polystyrene, which is covered on both sides with foil.
To fix the film on the ceiling, it is best to use a refractory anchors
Installation is carried out in the following sequence:
- First you need to fix the insulation rolls. They need to strengthen joint to joint. Use dowels for fixing the material. It is recommended to give preference to plastic refractory anchors.
- Eliminate the gap using foil tape.
- Attach the film layer on the heat-insulating material.
- Connect thermofilm strictly in parallel. To do this, you need to connect to copper bus bars special terminals, which, in turn, tightly squeeze the pliers.
- In a place where the thermostat is connected, perform Stroebe wall.
- Place the wire in the corrugated tube.
- Place the sensor in the corrugated pipe. It needs to be fixed just below the heating foil. For fixing using adhesive tape.
- Check the operation of the structure.
Which is better to install: a warm floor or ceiling
It is better to install a warm floor or ceiling warm? To answer this question clearly can not be, because there are a number of nuances. The benefits of the warm ceiling can be attributed possibility of installation of heating elements on a specific section of the room. Perform the same method with the floor will not work.
A significant advantage of a warm floor is a uniform distribution of the thermal air mass.
To the heating system worked well on the ceiling, you need to take care of high-quality thermal insulation
For example, it is possible to heat the floor to a certain temperature for 20-30 minutes, and then slow down the power and switch to more economical.
The disadvantages of underfloor heating include:
- The complexity of the installation.
- the need waterproofing.
- Increased consumption of electricity.
Warm ceiling or floor heating on the contrary (video)
Warm ceiling has many advantages. This system is an excellent alternative to all kinds of heaters. Warm water ceilings offer high performance and are absolutely harmless to humans, so they can be installed even in the nursery. If you decide to use this heating system, pre-align the surface of the ceiling and install the thermal insulation layer. Otherwise, the heat will be dissipated.