Installation of false plasterboard walls 3 Milestone
The presence of false walls in the interior make the room beautiful and originalnoyMontazh false-wall helps in many cases - if necessary to hide the lines of communication, if on top of the main wall should be more, if you want to hide radiators, pipes. In this work, there is nothing daunting, and can make it a layman. But some experience of repair work is still required, as well as special equipment.
What is the false walls of the FCL
Firstly, it is sound insulation or wall insulation. It turns out that for the false-wall you hide the insulation material or sound insulator. Usually it is a mineral wool.
Quite often the false wall is used as a decorative interior decoration
Falshstena and installation reasons:
- Laying system hidden communication;
- Installation of hidden mechanisms;
- Decorative purposes - for example, construction of specific niches.
Finally, such a false wall can align the curvature of the base wall. And, of course, is not load bearing partition for a room - so between the two zones in the room was such a makeshift wall. This zoning is also very much in demand.
The preparatory phase: the falsity-a plaster board wall
In the preparatory phase consists of the choice of materials and tools. It yourself drywall itself. Get the material manufacturer with a good reputation. Often choose moisture resistant drywall, since the problem of false walls - cover water communications.
Before installing false-wall, you should first make marks on the wall and prepare all the necessary materials and tools
Of the tools you will need:
- Construction points;
- Hacksaw gypsum;
- Scissors on metal;
- A hammer;
- side cutters;
- Roulette with a lock;
- A knife with a replaceable blade.
The next stage - marking the walls for mounting. Using paint cord can mark the ceiling and floor. At that distance, which is optimal for hiding pipes, wall kicking two lines parallel to one another. One goes to the ceiling, the other on the floor. Interval of 10-15 cm is usually enough. Then, at a distance of 600 mm from each other kicking vertical, mutually parallel lines. It is for them to be installed fastener elements.
Mounting battens: false-wall plasterboard with their hands
Next should be done several holes. Here come to the aid punch. The interval between the holes - 25 cm. In these holes clogged dowels.
A mandatory step is to mount the special crates
Further work is as follows:
- Once ready holes on them bolted rails of metal sheets. These framework elements are needed as the main support on them and made further installation batten.
- Racks of metal sheets fixed at a distance of about 50-70 cm from each other, it is done using a U-shaped profile (it is mounted on the wall itself).
- If all this is done in a wooden house, all works are simplified, because it is not necessary to drill the surface and clog the dowels. Crate is simply fasten with screws.
While working with the crate clearly monitor the plane. You can use for this purpose as a simple bubble level and a full water level. But better lasers with this problem, nothing will cope. He ensure maximum accuracy.
Installation GCR: how to make a false wall of plasterboard
When the crate is ready, you can begin the installation. Sheets of drywall, measure and cut off respectively options crates. To cut the drywall, you can take a simple and stationery knife, one that is incised cardboard cover, well, too much then just break off. The remaining layer of paperboard is cut, and it is possible to fasten a sheet.
Set false wall made of plasterboard can be their own hands, the main thing - to get acquainted with professional advice
Plasterboard is applied to the frame battens, screwed with screws. Observe extreme caution, because you're working with a brittle material, and if you do not calculate the force of pressure on the tool plate is easy to push.
After screwing the first layer of plasterboard, start the second mount on top of it. Above the second sheet is mounted to strengthen the structure. When installing drywall sheets extreme difficulties may arise - help regular plane, they are at an angle of 45 degrees with the sheet comes off the chamfer.
Instructions: false walls of plasterboard for the sliding door
Popular sliding doors have become in recent years - and they decorate the hall, good will, and in the children's room, and fit into the design of the kitchen. How can insert a sliding door in the false-wall or plasterboard wall? The following definition is quite simple algorithm.
Additionally, you can decorate a beautiful plasterboard wall and sliding doors
Installation of doors in the false-wall:
- Calculate the height of the mounting rail and the dimensions of the future of the doorway;
- Further, the partition frame is mounted;
- Then set the guide door and limit stops;
- Next comes the frame facing gypsum boards, and then Grinding clean floor;
- After that you can safely hang the door leaf with the installation of casings.
The frame is sheathed with plasterboard, flooring floors. : Door mounted bracket to connect them with the pins of rollers slot is selected for the bottom rail.
Installation of false plasterboard walls (video)
The great popularity of false-wall installation is due to the simplicity, availability of material as well as the range of possibilities. There is no easier than to take an environmentally friendly material, cheap, time-tested, and strictly according to the technology to make it a false wall. I deal with it and not professional.
Design trim plasterboard walls (photo in the interior)