How to prepare for painting the ceiling latex paint yourself

How to prepare for painting the ceiling latex paint yourself

12 October 2017



Before painting, it is essential to properly prepare the surface of the ceilingBefore painting, it is essential to properly prepare the surface potolkaOtdelka ceiling and walls of water-based paint in recent years is in great demand. This is due to the fact that this material is practical and durable. Before you put on a concrete ceiling surface paint, it is necessary to prepare the surface properly. This will ensure a better grasp of the material. Carry out training with their hands easily. The main thing - to adhere to a number of simple rules.


How to start a training regiment for painting

Surface preparation begins with a primer. It should be noted that the start to this process is necessary after you remove the whitewash from the surface. For finishing the concrete ceiling is necessary to use primers with deep penetration. These materials will secure the ceiling of mold and mildew. Alternatively, you can use a general-purpose primers materials.

If you want to prepare a wooden ceiling, you should use specialized impregnation. They reduce the risk of mold on the surface. In addition, such impregnation will secure the ceiling of bedbugs and other pests.

Priming is an essential step in the preparation of the ceiling, as it is it helps protect the surface of the mold and mildewPriming is an essential step in the preparation of the ceiling, as it is it helps protect the surface of the mold and mildew

Ceiling Primer algorithm:

  1. First, dissolve the mixture.
  2. After that, pour the primer in the tub. Desirably, the bath had a flat ribbed configuration.
  3. Dip the roller in a tray.
  4. Laminated roller for ribbed surface.
  5. Apply the mixture to the surface.
  6. Then wait until the first layer dries, and apply a second. If you want to speed up the drying process of the material, use the heater.
  7. After finishing work on the ceiling Prilep tape. If he holds on, it means that you are dealt a mixture to the surface correctly.

Do I need to wash off before painting the ceiling surface

If you are preparing for painting the ceiling, then it is necessary to wash whitewash from the surface. Otherwise latex bad lie. Grout is made by means of vinegar, baking soda, roller, spatula, a foam sponge and a polyethylene film.


Before painting the ceiling latex paint must be completely washed off the old whitewashBefore painting the ceiling latex paint must be completely washed off the old whitewash

Before starting work, cover with foil furniture. Then you need to prepare a mixture. To this mix of 10 liters of water, 3 tablespoons baking soda and 2 tablespoons vinegar. Stir the mixture until smooth.

Grout in the following order:

  • Before you wash the ceiling, moisten the surface with water. In order to accelerate the wetting process, you can use a special spray.
  • Then, using a spatula, carefully remove the whitewash. It can be further wet the surface if desired.
  • Dip a sponge in a pre-prepared solution.
  • After that, rinse the remnants of whitewash from the ceiling. Then allow the surface to dry, and proceed to the drawing of putty.

Preparing the ceiling and walls for painting with his hands

After you have removed the whitewash and struck a primer on the ceiling, you need to begin to strengthen the surface. This procedure helps to give additional strength to the surface. To enhance the surface you need to fiberglass.



Gain Algorithm ceiling:

  1. Treat the ceiling portion with an adhesive solution.
  2. Press the first piece of glass.
  3. Lubricate the other adhesive ceiling portion and push it to a second piece of glass fiber.
  4. With the help of a knife stationery fabricate the total cut. It is desirable that it was at the overlap.
  5. Remove any excess fabric.
  6. Glue the entire ceiling.
  7. Wait until the glass is dry, and apply a next layer of the adhesive solution.

After amplification surface, proceed to putty. To qualitatively level the surface, you need to perform this procedure in a darkened room. The light source bulb use.

Before applying the filler cap needs to be strengthened by means of fiberglassBefore applying the filler cap needs to be strengthened by means of fiberglass

Apply the plaster is necessary in the following sequence:

  • First, prepare the putty mixture.
  • Apply the first coat. Once it dries, apply the next. Note that the second layer must be perpendicular with respect to the previous one.
  • With the help of sandpaper surface finish.
  • Then apply a thin layer of primer, and on top of it several layers of putty.

Grinding ceiling for painting

The final stage of preparation - grinding surface. Carry out this operation, you can manually. To do this you will need a specialized float. If you are sanding by hand, be sure to use a dust mask and goggles.

When choosing a grater, consider the following nuances:

  1. Do not use the integrally cast with recesses grater.
  2. We recommend selecting a grater, to which is attached a network or sanding sandpaper.
  3. If you choose between the sandpaper and the grid, prefer sandpaper. This material is more durable. In addition, grinding chain quickly wears out.
  4. Use sandpaper made on the basis of a cloth material.
  5. Look out for grit sandpaper.

If you are using a grinding machine, in its sole affix insulation slabs of izolona. Its thickness should be at least 3 millimeters. This reception will protect tools from wear.

For grinding the ceiling is better to use a special sander and, without fail, respiratory protectionFor grinding the ceiling is better to use a special sander and, without fail, respiratory protection

When working with a grinder consider some of the features:


  • Before you start grinding, on a rack to install a light bulb. This technique will help you easily identify irregularities on the surface.
  • To finish grinding using the net number of 100.
  • When working with the machine must be the degree of wear of the grid.
  • During operation, using a dedicated stand. If you have the opportunity, use the machine, which has a special rod.

How to prepare for painting the ceiling latex paint (video)

Carry out preparatory work simple. You need to start working with the elimination of defects using putty or sealant. Only after that it is necessary to proceed to the primer and subsequent work. The selection of materials should take into account the material from which made the ceiling. Also, be sure to carefully sand the ceiling. If the surface is rough, the paint will be better to go to bed.

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

− 4 = 4

map