How to make the installation of rack ceiling with his hands – instruction
Rack ceiling - a versatile and practical material for finishing the ceiling pokrytiyaReechny ceiling can decorate as a dwelling, and the public. It's pretty universal, popular in recent decoration, which is in a hurry to do thanks to the excellent performance properties.
Mounting rack ceiling: the device
Rack ceiling is classified as false ceilings. Design consists of panels - usually metal, steel, plastic panels still belong to another species. Also in the kit is included suspension system for racks.
Today is not a problem to set a ceiling on the individual order, where rail length will match exact size of your ceiling.
With a strong desire, set the rack ceiling can own, the main thing - to make an accurate counting
Rack ceiling is set at the last turn, after being made wall decoration, etc.
Reiki can be different: glossy or matte, with a perforated surface or smooth, they also differ in texture. For example, it is possible to assemble the structure of the reek "under the skin", or rails "under the tree."
Sami slats can be positioned as a traditionally - along the floor and across the floor and on a diagonal.
How to make a rack aluminum ceiling in the bathroom (video)
How to install the rack ceiling itself
The first thing to do - collect the necessary tools.
To work you will need:
- Scissors on metal;
- Building level;
- A sharp knife.
How to mount the ceiling? First you mark the place where it will begin a new ceiling. The distance should not be less than 5 cm from the basic ceiling. This mark is transferred on the perimeter of the room, just use the building level.
Before you begin installing a ceiling rack, check the following: Are you all necessary tools and materials prepared
Draw a line and make a mark, measure the length of the wall, cut off a piece of the angular profile. It is usually cut with scissors for metal.
Next, attach the profile of the line drawn by the wall and make a hole with a drill. To tighten the screw with a dowel. Profile consolidate needed in increments of 500 mm, and check the level of evenness. What is important, on the inner corners of the profile is fastened end to end, and has at the outer corners of the needed angle of 45 degrees.
As mounted rack ceiling correctly
Using the measuring tape should be noted the site of attachment of support rails. First otmetochku make a distance of 300 mm from the wall, and the subsequent need to be 90 cm, while parallel to each other.
Suspensions are fixed by screws and plugs, the holes pre-drilled with a drill. According to the level verified the position of suspensions.
When mounting the rack ceiling it is important to mark the site of attachment of support rails, this will depend on how much will be your flat rack ceiling
Mounting support rails:
- The interval between the support rails must not exceed 1- 1.1 m. Tires reechkam arranged perpendicularly, and this is important, flush with the profile of which is nailed on the perimeter.
- Tire bolted to the suspensions screwdriver. To design was perfectly flat, take care to never admit error.
- The interval between the angular profile and the bus is equal to one centimeter. If a tire, for example, proved to be short, do not worry - it just nadstavte. For this purpose, you just need to fix the suspension at the start of the next bus.
Well, then immediately begins the installation rack surface.
Installation Guide rails
Reiki should be freed from the protective film, and cut according to the size of your ceiling. Its length should be at least half a centimeter interwall distance (opposite).
After you install the rails, you will only have to attach a plinth
Then you do so:
- Reiki should be carefully inserted into the guide and engage the entire length in the tire locks. Further rack mounted next to the previous one.
- If necessary, the tire height is adjusted, and it is changing the depth of screwing in screws.
- If not approached the last rack, you just cut in front of her in width. Note the distance along the length of the rack, drag knife and bend until the rack is not broken down.
- Install the trimmed rail, and secure it with wooden struts or pieces of angular profile.
ceiling assembly and involves a plinth. This is an important decorative element, and it is sure to give it a finished look and also hides the unattractive gaps between the walls and the structure.
There is one more thing - the kitchen often guilty of irregularities of the walls, and they require a plinth that visually aligns structure.
How to make the wiring for light fixtures on ceilings gear
Typically, spotlights are mounted on suspended ceilings.
Provided are two ways to work the lighting:
- When all the lights are included immediately. In this case, the switch from one two-wire stretch. And already from this wire make bends from the luminaire.
- When the lights are turned on by the groups. The central wire in this case should have lived so much, how many groups you select. Usually there are two or three groups. It is used, which is logical, dvuhklavishny and three-key switch.
On suspended ceilings beautiful and practical look spotlights
To connect the lamp, you need a cable with a cross section of 1.5 square meters. And that is enough for standard lamps.
For luminaires with the same great power needs a special heat resistant wire. Under high power output exceeding 50 W is implied.
Repair rack ceiling with his hands
See, of course, necessary to the circumstances, but usually involves the disassembly repair of the ceiling, ie dismantle most likely partial.
If you need to repair your roof rack, then the process will begin with a partial disassembly rails
First you parse one of the edges - trim corner profile that you want to hook knife. Then bend it so that it was possible at the end of the rail safely pull. Ultra module is released from the stringer locks and gently removed.
On the other ceiling moldings occurs reverse operation - opens all the locks, and the release of the panel is moved to the edge. Then it is removed without problems from the overall design.
The process of installing a ceiling rack (video)
Rack ceiling can decorate a bathroom, a kitchen, a balcony, but in fact - any room. He decorates and square and rectangular ceiling. Because make no mistake, "installation / uninstallation" Do all the instructions and enjoy the result.