How to install the pipe in the bath through the ceiling own

12 October 2017



The main aspect in the construction of the bath is the installation of a pipe according to all the rules of fire safetyThe main aspect in the construction of the bath is the installation of a pipe according to all the rules of fire safety Many people prefer to hold the pipe in the bath through the roof. This design is the most reliable and durable. For the manufacture of chimney you can use different materials. For example, you can use the sandwich pipes or build a chimney made of bricks. Before you install the structure you need to do right by the diameter of the hole and seal the chimney.


Tube in a bath through the ceiling and roof: types of flues and design features

If you choose to install on the ceiling tube with your hands, you need to find a suitable design of the chimney. The tube may be external or internal. External flue less fire hazard, and easy to install. The internal arrangement of the chimney allows you to store a greater amount of heat.

When selecting a pipe must take into account a number of nuances:

  1. The pipe should be made of galvanized metal, ceramic or brick. Apply aluminum tubes is prohibited.
  2. Make insulation for pipes best of non-combustible materials. Perfect concrete block or stone wool.
  3. As the thermal insulation materials must be used exclusively foil materials. It would be the best aluminum foil.
  4. If you are using a sandwich pipe, then it is necessary to fill in the basalt wool.

When mounting the tube in the bath must be used, galvanized metal, aluminum apply strictly forbiddenWhen mounting the tube in the bath must be used, galvanized metal, aluminum apply strictly forbidden

Before installing the pipe, mark the surface of the ceiling. Remember that the chimney must not come into contact with roofing materials, as it may damage them. In order to avoid damage to roofing materials, it is necessary to install a metal housing.

Sandwich tube in the bath in the ceiling

If you are a beginner, it is best to install in the ceiling of a "sandwich" type of pipe. Its quite easy to install, and it is fireproof. Sandwich pipes are usually made of several metal layers, between which is set some flame retardant.


Is sandwich tube quite easily. Assembly begins with securing the article to the nipple. To fix you need to use the starting cone. One end of the starting cone is put on the tube, and the other is mounted on the forward portion of the flue pipe.

Sandwich tube should not be directly in contact with the wooden elements of the interiorSandwich tube should not be directly in contact with the wooden elements of the interior

Cutting sandwich pipe is carried out in the following order:

  • The roof assembly set. It is needed for the tight fit of the tube.
  • Do a hole in the ceiling. Remember that its diameter must be 15 centimeters longer than the diameter of the sandwich pipe.
  • The space between the large-diameter pipes and sandwich pipe filled with sand or expanded clay.
  • If you do not want to use large-diameter pipes, it is necessary to install conduit, through which will pass the sandwich pipe. The empty space in the box must be filled expanded clay, sand or basalt wool.

How to make a brick chimney in the bath through the wooden ceiling

Chimney made of bricks, is the most robust design. Before proceeding with the installation design, you need to design a chimney. During the design should pay attention to the features of the stove, which is installed in the bath. Also bear in mind that to set a massive chimney brick impractical in small baths.



It is best to collect the chimney on the ground as on the roof to do it will be extremely difficult. To raise the roof of the chimney can be used hinges, spears or banners. As the fixing material to the flue pipe clamps must be used.

Brick pipe is considered the safest option for output of smoke from the bathBrick pipe is considered the safest option for output of smoke from the bath

Installation technology of the chimney on the roof:

  1. Make a hole under the pipe. The diameter of the passage should be under 20 centimeters larger than the diameter of the pipe itself.
  2. Then you need to bring the product through the roof.
  3. Isolate the pipe with a metal sheet.
  4. Seal construction places by the edges of the sheet under the roof.
  5. Attach the metal chimney hood. It will protect the structure from moisture.
  6. Apply heat-resistant paint on the chimney. It will protect the metal parts of the structure from the effects of corrosion.

pipe cutting on a low ceiling of the bath: the rules and regulations

If you decide to bring your own pipe, you need to adhere to a set of rules regulated in the SNIP. First of all, you need to take care of the installation of a special node pass. From the outer surface of the pipe to the purlin and rafters should be a distance of 130-150 mm. If you use a ceramic tube without insulating materials, the distance between the chimney and rafters must be not less than 260-270 mm.

The loft bath pipe must be sealed using special materials from direct contact with the skinThe loft bath pipe must be sealed using special materials from direct contact with the skin

When choosing a walk-through nodes, note that you need to use only those products that are made of metal. Also in the through node must be set stainless steel plate. For pipe penetrations must also be made entirely of stainless steel.

When cutting pipes also need to take into account a number of nuances:

  • In places where the overlap overlap joints should not be present. Consider this nuance in the design section.
  • For insulating pipes using non-combustible materials or factory sandwiches.
  • Smoking pipe is rigidly fastened to the overlap, since the material of the chimney can be expanded under high temperature.

How to derive from the bath tube through a high ceiling

To properly install the structure, you need to prepare the holes for the chimney. It is recommended to sheathe their metal sheets. The sheet thickness must be at least 0.5 millimeters. The holes should be square.

It is important to raise a protective box correctly. To assemble the adapter you want to use 4 metal sheet measuring 50 * 50 cm. In the middle of one of the sheets need to cut a hole for the pipe. Metal sheets are joined together by welding.

The pipe must not have any damage, special attention should be paid to the weldsThe pipe must not have any damage, special attention should be paid to the welds


Subsequent installation is performed in the following order:

  1. Insulate duct basalt and obsheyte it foiled metal material.
  2. Set the first pipe segment. It must attach to the oven with metal fasteners.
  3. Then set the second link.
  4. Fill the box expanded clay.
  5. Secure the subsequent segments.
  6. After you collect the pipe, install a metal umbrella.

Installation of the pipe through the ceiling in the bath (video)

Hold the pipe through the ceiling is a snap. The main thing - to choose the suitable insulating materials and install the correct box. To assemble the structure, use only non-combustible materials. In step structure design note all the nuances and the furnace roof. Remember that the chimney should be isolated by means of the casing. Otherwise roofing materials can ignite.

Output pipe through the ceiling in the bath (Photo)

1-3-768x663 9-foto152-- 70dd4be6b8629e7b2583ed746759f7f7 516 911-kaknelza-27 3553782 1413995249pech-kamenka-s-vynosom-topki1 1444093716montazh-sendvich-dymohoda a1dae93c9f2227130f3ac6e59fc6cc5d content0579187a40696dxl


Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

46 + = 51