How to glue the foam-adhesive drywall: 4 Repair Board
Using drywall in making repairs, be sure to buy foam glue, which will quickly stick to the sheet poverhnostiGipsokarton - very popular material that is used in the decoration of walls and ceilings. It has a smooth surface, which greatly simplifies subsequent decorative finish walls. Attach to the drywall surface can in many ways. One of them - the foam-adhesive drywall. It allows you to save time when installing the sheets, as well as to take a minimum of space. To perform the installation properly, you must know the characteristics of the material, its characteristics and treatment methods with them.
Surface preparation before installing drywall on the foam
Having made the decision to install drywall on the wall or ceiling using the foam, it is necessary to get acquainted with the peculiarities of this type of attachment. This is a convenient way to set the sheets as the wall surface may have a deviation of different levels. When heavily large deviations for gluing sheets using special guides.
Before you glue the drywall on the wall, experts recommend to clean and prime the surface
It is important that the foam was of high quality: its properties should be seen immediately after application.
Fixing the plasterboard needs to be very reliable, since foam properties affect its ability to repel the material from the wall. It's over, it is better to perform the pre-treatment. The walls, ceiling and sheets must be primed.
- Remove from the walls of the old finish.
- Cover the wall primer.
- Attach a sheet of drywall to the wall and drill at 9 points.
- Label drill holes for fasteners.
After completion of the preparatory work can begin to mount the sheets GCR. With self-assembling experts recommend to start to set one sheet and allow it to dry. If the next day you are happy with the result, then we can proceed.
Drywall on the mounting foam: it is worth considering
Install drywall sheets to a wall or ceiling in several ways. One of these involves fixing sheets with screws, fill foam between the surface and the plasterboard. Another embodiment involves the direct application of foam on the back side of the GCR.
If you decide to stick to the wall of the drywall with foam, then be sure to take into account the weight of gypsum board
It is important to take care that the temperature of the spray foam does not fall below 5 degrees Celsius.
It is best to apply the foam zigzag lines 3 cm in diameter. Necessary to wait 5 minutes after foam application. After that, you must firmly press a sheet of drywall to the wall.
What you need to consider:
- Weight plasterboard sheet;
- quality of the foam;
- External factors in the room.
After the sheets are dry out, seams between the sheets and the holes must be sealed with putty. Bumps and cracks can also be closed with foam. All work on finishing drywall should be performed no earlier than an hour after installation.
How to glue the drywall Penoplex: milestones
Penoplex used for insulation of walls indoors. After installation of the plates Penoplex, it is mounted on the drywall. It can be attached in different ways, one of them - the paste sheet using an adhesive or assembly foam.
Sticking plaster board wall can independently, the main thing - to get introduced to the process of carrying out this kind of work
The work should be carried out carefully: You should think in advance all the stages of the finishing process.
To achieve smooth walls can special gluing bars which will support the plasterboard sheets. The bars can be prepared in advance - they must be of different sizes. gluing technology is quite simple.
Stages gluing drywall on penoplex:
- Lay a sheet onto a flat surface.
- Apply the adhesive solution in the form of heaps.
- Push the plate to the wall.
When applying the solution it is important to make sure that the distance between clumps was uniform and small. Heaps better to do little. It should be noted that the adhesive has the ability to rapidly solidify, so to put it to speed.
Whether it is necessary to glue the drywall on the mounting foam
Many people wonder: Is it possible to glue the drywall to the wall or ceiling by means of foam. Many artists today are advised not to do so, as this process is quite laborious. Besides, the quality of fastening of sheets depends on the accuracy of gluing and following the instructions of the wizard.
In order to efficiently and securely glued to the plasterboard wall, best to seek professional help
It is important to consider the fact that the gluing of drywall on the foam material to be pressed against the wall for 15 minutes each hour.
It is also important to take into account that the foam tends to expand. You need to carefully press drywall to the surface to foam it is "pushed". After gluing there is a possibility that the sheets be restrained.
Reasons not to glue the drywall on the wall:
- Long process;
- Perhaps the appearance of the mounds;
- The probability of peeling in the commission of wrong actions.
Polyurethane foam is a fairly durable material. That is why many craftsmen use it for gluing drywall. This avoids unnecessary construction work. The very sticky takes a lot of time, especially if done with their own hands for the first time.
Species-adhesive foam for gypsum board (video)
When we are sticking to the surface of the plasterboard wall or ceiling, we must adhere to strict rules. It is important to carry out preparatory work: the right to make a slope, make sure that the previous finish, paint and wallpaper, has been removed. Only then can you proceed to the main type of work. It is necessary to carefully consider the choice-adhesive foam, because of its quality depends on how plasterboard glued to the wall. To glue the drywall - a rather laborious process, but if done properly, finish lasts a long time and reliably.