Eliminating uneven surfaces: leveling the wall plasterboard
Plasterboard is an excellent material for walls leveling thanks to good performance and low price of Experts for many years to align the walls used a material such as drywall. He has earned many positive reviews, and not without reason. With his help create a perfectly flat surface and is at its relatively high cost.
How to align plasterboard walls: the advantages and disadvantages of the method
Masters who are engaged in repair, knowingly choose to align the walls of plasterboard. And it's not just small disguise bad plaster, but with absolutely smooth walls can be achieved using well established structure, if they are going to drop.
Aligning plasterboard walls, it is possible to further insulate them using mineral wool
In drywall like a finishing material, the mass of the advantages and disadvantages:
- It contains no toxins;
- Environmentally friendly;
- It does not contain synthetic additives;
- No need to use plaster - a minimum of putty;
- Easily disguises communication;
- It allows for thermal insulation and noise reduction;
- Easy to install;
- Easy to cut and bend;
- Poor reacts with water - ports;
- It is necessary to strictly follow the installation technology in accordance with GOST;
- The desirability of further finishing;
- It can not be stored horizontally.
Despite all the shortcomings, namely plasterboard most suitable material for finishing the rough walls.
Is it possible to put drywall on uneven walls
Of course, to make the wall smooth as possible and in other ways, but it is drywall is the best material for this task. The main difference is that the assembly of the frame profile and the installation itself sheets themselves are so simple that to cope with them, even people who do not have skills.
Due to the metal or wooden frame, you can hide all the irregularities of the walls
Thanks to modern technology, the previously fragile and perishable drywall has changed beyond recognition.
Now there are several types of it:
- GCR (simple);
- GKLO (with fire protection);
- Gypsum plasterboard (with protection from water);
- GKLVO (with protection against fire and water).
This diversity allows the use of plasterboard construction throughout. However, in the bathroom and kitchen decoration is still not recommended - prolonged contact with water spoils the sheets and under the influence of a pair of warped drywall. Drywall, of course, has the function of sound insulation, but not to the extent as the manufacturers claim. Therefore, it is better to lay in the design of noise canceling material or insulation, which dampens sound too bad.
Procedure: How to align the wall with plasterboard
Still, drywall - a material capricious and requires a specific sequence of actions. In this case, it is so easy to install, it's pretty easy to sheathe the walls with his own hands.
In the construction of the frame for plasterboard need to take place for wiring, switches and sockets
To perform the work, we need:
- Sheets of drywall;
- Profiles for ceilings and walls;
- Scissors for metal;
- A sharp knife;
- Straight rake;
- Pencil (pen, marker);
- Materials for finishing.
First, you need to partition - select the most prominent points, and have to start the calculations from it. Guide, that is, those that are on the walls of the profiles are mounted at a distance of one meter from each other by means of dowels.
A ceiling is attached directly suspensions. You need to check the strength - the design must be well fixed. The resulting metal box secrete communication stack soundproofing and heat insulation. Plasterboard is cut according to the size, and then fastened with screws. Seams carefully shpaklyuyut. After drying, they are treated with sandpaper, and then the wall can be subjected to further finishing.
Recommendations on how to align the wall plasterboard without profile
Sheathe the walls can do without expensive installation of the profile frame. This procedure is much easier, it takes less time and spend less money. But the strength is reduced, so strong unevenness can not be corrected. But if there is no big flaws, then this method is perfect.
To align the walls with drywall without a profile, you must use glue
To work will be needed:
- Clay, for example, "Perlfiks";
- Tape for joints;
To prepare the glue does not need more than ten minutes - it quickly hardens. It is applied to the reverse side of the sheet in the form of small piles or strips, and then the sheet is pressed. Remove excess adhesive. Incidentally, the position of the sheet can be corrected, until the adhesive is stiffened. Sutures shpaklyuyut using tape. When everything is dry, you can decorate the walls next.
expert advice: how to align the walls in the bathroom plasterboard
Thanks to modern developments, there were special sheets of plasterboard - water resistant. Learn simply for the green. They can be used in the bathroom, but it is worth remembering that even a plasterboard with waterproof additives deteriorate from prolonged and direct exposure to water.
When working in the bathroom is necessary to consider some nuances:
- If the installation is performed with the frame, it is necessary to add another layer of finish where there is the highest probability of mechanical damage;
- When finishing tile-layer substrate recommended everywhere;
- It is necessary to reinforce the waterproofing premises;
- Looking good ventilation.
During installation of drywall in the bathroom, you should cut a hole in the ground crane location and install a small door
Mount Technology is no different from the finish in a normal room.
It is worth to pay attention to communications. Many people do not like the fact that the pipe spoil the look of the bathroom. Great solution is the installation of ducts of the GCR, which will hide all the unwanted things eye, but leave room for decoration, including tiles.
Do you need a box immediately after the installation of all communications. The principle is simple: to tokenize, assembled profiles, plasterboard attached to them. To smooth the joints, sometimes used soft corners of the right color.
Very carefully should be taken to further finishing. Even reinforced gypsum board will not stand too heavy decorative materials, so the tile is better to choose is not too large.
All materials must be resistant to steam and moisture, then finish lasts longer and does not lose its attractive appearance.
Processing antifungal spray slits can prevent the formation of mold. You can also handle some of the surface water-repellent materials.
The walls can be leveled except for drywall
Alignment of the walls requires a specific approach, depending on the degree of roughness.
In addition to drywall there are a number of materials that perfectly cope with this task:
- The wooden plate and the plate;
- Mixtures based on gypsum (type Rotband).
To equalize the wall with a plurality of defects applied plaster which is applied a thick layer
Putty is applied to the local leveling or for masking minor imperfections walls - a thick layer will not stick, creep. For larger jobs, mixtures Rotband - on properties they are plastered, but serve to align better than ordinary cement plaster.
Plaster itself - proven over the years how to justify even the most complex irregularities. You can use the high-quality finish "beacons", that is, using metal profiles.
The easiest way to use the so-called "dry" materials, ie drywall, wood, and even siding. They successfully mask minor defects of the walls, but thanks to the frame mounting options make the room absolutely flat and proportionate.
Do not forget that the material for the alignment of the walls must be selected in accordance with the further trim. For example, a wooden panel is not necessarily paint or wallpaper - enough to cover antiseptic colorless varnish.
Proper alignment of the walls of plasterboard (video)
Alignment of plasterboard walls - it is the most appropriate and up-to option. In addition to ease of installation, drywall can be purchased at any hardware store for appropriate and affordable prices. It is possible to select the size of sheet, thickness, and resistance to water and \ or fire, which makes the material able to use and operate in virtually any environment.