Elegant solution for finishing: multi-level ceiling of plasterboard with backlight
With gypsum board can be changed any pomeschenieMnogourovnevy plasterboard is a structure suspended finishing, metal frame, which holds the weight of all this, also mounted on several levels.
How to make a multilevel ceiling of plasterboard with their hands
The surest option - installation of the first level of the drywall, and on top of it fastens the second level of CD-profiles. The main thing is to comply with one single rule - do not combine into a single plane seams several levels. That's why it is more convenient to do the ceilings with curved lines and forms - a new level of care will not be repeated.
The first layer of the plasterboard is fastened usual manner - on the guide profiles and crate. Sami metal profiles can be fastened rigidly to the unfinished ceiling or stick on metal belts, and more on the perimeter (just on the screws).
And he and the other option - is quite good, but the installation of the ceiling on capital is not always reasonable (for example, if it is not flat).
The circuit structure of two-level ceiling
Total raznoyarusnye plasterboard ceilings are mounted as follows:
- first base layer is made of plasterboard customary manner;
- Next, you need to make a new frame at the second level, initially setting the form of boxes;
- etc. - gradually attach new levels to the desired height. All lighting and electrical (wiring) are hidden in the box itself.
Three-level ceiling of plasterboard with their hands: installation
You can consider the example of a three-level process of installation of the ceiling of plasterboard with their hands. And the last layer will be "floating", that is, without attachment to the walls. Stacked are made in the same way as the three-level, taking into account only the static weight of the structure. Accordingly, for the first level you need to do is extremely durable frame that can withstand not only static, but also dynamic load (to the ceiling is not collapsed during flooding from the neighbors above, for example).
Thus, the design is created as follows:
- First - the main battens made of aluminum profiles.
- On the purlin attached first layer of plasterboard and the seams are rigidly connected-screws fleas.
- Further Drywall first layer is laid a new profile. Rigidity ensure the installation of the perimeter.
- The device is then closed in the same Papier duct, aligned to the desired height.
- The last stage - a soaring level of drywall, which is mounted in the same way, only in this case used the closed CD-profile. Form - free.
After setting the first tier of the assembled profile, and other communication wiring
Likewise, longline mounted ceilings, only film is used instead of the drywall sheets. Backlit engaged in the least, that is, when the base of the ceiling is ready.
What is the soaring ceiling of plasterboard
Ceiling Clouds - means that it does not mount on the perimeter. That is, it rests on the batten profile, and visually it looks like on the drywall.
It is possible to mount an ordinary method. If you plan on the perimeter to create a soaring level of illumination, there are mounted niche (you can use special moldings), inside of which is mounted on the tape LED ribbon desired shade.
A floating ceiling - is a separate kind of soaring, only the entry level is such, though he is not connected to a wall. In fact, there is mounting there, but it is closed by the same bright illumination. We should not look at this option if you plan to mount the tension glossy film.
For the floating ceiling is recommended to use the thinnest drywall sheets. If on-site "floating" box is planned to attach a chandelier, it is best to fix it as the first level profiles or even for capital ceiling. Provision will still be placed behind a false ceiling.
The effect of the floating ceiling is created by Wholesale Led lighting, mounted on circuit design
To illuminate the soaring ceiling suit:
- LED tape;
- LED lights;
- conventional candle lamp with light directed upwards.
In fact, design decisions much more, but the above are simple and inexpensive options for highlighting the organization.
Multilevel ceilings plasterboard backlit own hands
Many tiered ceiling, as opposed to one continuous layer has a so-called deflection index. And it should be taken into consideration. Accordingly, one of the second-level assembly is only hard, without any ties or suspensions, which can not withstand the weight of more than 10 kilograms.
To create a multi-level ceilings, use the appropriate profile classification CD, D, CW, UW, and the like. Only in this way the design can easily withstand even high humidity in the apartment (drywall like a sponge absorbs moisture even floating in the air).
If the second level of the project has a curved or broken outline, the band is cut from sheet, it is soaked in water, after which the gypsum board becomes soft and pliable
As for the backlight, since hide controller and power supply unit for the tape and the LED lamp it is generally recommended to separate niche made in the wall. Wiring routed in any convenient manner, but preferably not through the profile. Otherwise, a burn-out wires have to disassemble almost the entire ceiling and remove a layer of plaster.
On average, the maximum possible load of the ceiling level is:
- 100 kilograms of a first layer (3 Room 3 m on average);
- 60 kgs - the second;
- 30 kilograms - on the third.
This limits. But what is less - the better.
Multi-level flow of plasterboard (video)
Total, make their own hands a multilevel ceiling is not difficult. The only problem - is to create a sketch on which will be made available gypsum boards, as well as their cutting. To create a curved bends better use jigsaws, and all sections of space to handle sandpaper fine grain.
Multilevel plasterboard with lighting (photos)