Design ideas stretch ceiling lights or LED ribbon inside

12 October 2017



Suspended ceilings with lighting inside - is a stylish solution to give the room an unusual appearanceSuspended ceilings with lighting inside - is a stylish solution to give the room an unusual appearance MAS speed at which progress in the modern world of technology. More recently, from the words of the suspended ceiling it became pleasant to the soul, but empty purse. Now, when the ceilings on the Russian market are all kinds of companies and competition is very high - the ceilings are available now. Therefore, designers offer different solutions, including a stretch ceiling lights LED ribbon inside.


What are the types of illumination of suspended ceilings

Depending on the height of the room and the possibility of a bite 10 cm. The height of the room can make several kinds of suspended ceilings and the highlights for them.

Some types of lighting that will provide a good, but not enough coverage:

  • LED strip around the perimeter of a single-level tension ceiling;
  • A two-level ceiling with boxes from the FCL on the perimeter with illumination;
  • LED strip for stretch ceiling - simple forms;
  • Design ceilings with light in accordance with the overall design.

When installing any of the designs raises the question about the change of light, or rather LED strips in the ceiling.

In most cases, creating a tension ceiling lighting using LED tape with a long service lifeIn most cases, creating a tension ceiling lighting using LED tape with a long service life


But the producers tapes themselves promise to smooth operation of their lighting equipment for ten years.

During this period, even the ceiling is something to happen, so the installation of LED strips for the entire construction of a stretch ceiling is a safe and long-playing setting.

But if there are concerns about the durability of LED strips in the ceiling, it is possible to place them on the perimeter, hidden in a box of drywall or just below the stretch ceiling, covered with a special plinth.

LED strip in the tension ceiling - the beauty within

Suspended ceiling with LED strips in choosing young people and children's rooms.



The advantages of such lighting is much more than the minuses:

  1. LED Strip spend far less energy than conventional fluorescent lamps;
  2. This illumination is ready to serve for years without replacement of lamps;
  3. They allow you to create unimaginable and unforgettable interiors;
  4. Lighting can serve instead of a lamp;
  5. It has the ability to set the intensity of the backlight;
  6. LED strip can be white or colored.

Multi-colored LEDs can be placed not only on the perimeter, but throughout the stretch ceiling surfaceMulti-colored LEDs can be placed not only on the perimeter, but throughout the stretch ceiling surface

On the downside can be attributed only to the fact that one and the same ceiling picture can get bored for a long period.

Young people prefer to do the unthinkable light shapes on the ceiling in his room, or to create light music for home parties and discos.

The children's room is lighting indispensable. Many kids are afraid to go to sleep without a light, but include point night light or leave the top daylight - very expensive. LED strip on the ceiling in the nursery can be made in the form of a starry sky or a card is a ribbon in the form of the beloved hero. The child will sleep, and energy savings will be seen in the first month.

Suspended ceilings with lighting on the perimeter - the installation options

Create a relaxing mood lighting gives a soft stretch ceiling on the perimeter. In the evening I want to relax not only yourself, but also your eyes, for this reason, the installation of LED strips along the perimeter of the best lighting option. This light does not get tired, never go out of fashion, the tape is easy to change.

When assembling the backlight stretch ceiling perimeter LED ribbon mask with a special plinthWhen assembling the backlight stretch ceiling perimeter LED ribbon mask with a special plinth

Mounting principle is to install LED strips on the wall just below the ceiling. That would not have seen the construction of its close special decorative moldings. You can make a multi-level ceiling, the perimeter of which is made of GCR and the tape will be hidden in it. In this case, you should not do glossy stretch ceiling, as the whole structure of the drywall tape and will be reflected in the glossy, as in a mirror. This picture is very spoil the interior design and will be the worst in the house.


It is important to know that the LEDs do not provide full coverage and the chandelier is also needed in the room.

Option illuminated by a stretch ceiling perimeter is good for the living room or dining room. In the evening, when I want to relax, and watch videos or TV, you can turn off the main light, leaving only the LEDs on the perimeter of the room. Such coverage is necessary because watching TV does not light opticians do not recommend, and in broad daylight by a chandelier not rest your eyes.

In addition, the intensity of LED lighting can be reduced, and create a comfortable environment for yourself.

Installation of LED ribbon under the suspended ceiling

Of course, not everyone will be able to install the suspended ceiling with his hands, but to make an unforgettable light pattern is available to many. Since ceiling mounted, it is fixed only for the guides to the perimeter of the room, the space between them, but rather the entire rough ceiling - a field of action and a blank sheet of paper.

To make an exclusive light pattern in the first place to draw the location of bands on the ceiling. Depending on the pattern and color of the ceiling material to choose LED strip. It can be white or colored LEDs.

By his own figure to be measured footage of the tape itself, add a bit of unexpected changes or additions, and purchase the material, namely the very LED strip connectors for connecting the individual parts of the tape, wires for connection to the power grid of the room and switch to change the color intensity.


LED ribbon to serve a long time, without requiring repair, it is fixed to the surface cleaned and degreasedLED ribbon to serve a long time, without requiring repair, it is fixed to the surface cleaned and degreased

How to mount a tape:

  • Since the tape has an adhesive base, then fasten it to the ceiling, you can easily, the only problem that the ceiling should be fully prepared to this effect. Namely, the surface should be degreased, primed, sanded and filled.
  • The adhesive layer adheres very well, and for this reason it is necessary to proceed slowly with high precision and caution.
  • Cut tape can be only in specially marked places and connect with special connectors. Strong creases as well affect the duration of LEDs, creating an image, it is worth considering this fact.
  • After complete bonding and connection of all the components are on the ceiling, you must connect to the network coverage. But do not think that the wires of the ribbon can simply be included in the overall network or outlet. This is done through a special converter, which is called a power supply unit.
  • For tapes of different lengths have their own power supplies and their capacity should be calculated depending on the length of the tape and the amounts thereof. Depending on power consumption LED strip that specified in the certificate, as well as in the manual, which is issued even when buying one meter.

Power consumption is indicated on the length 1 meter, so the installation must be multiplied by the length of the Lena power of one meter.

Installation of LED ribbon in the suspended ceiling (video)

Seeing the result, it is necessary to select the most close to it the power supply. Having studied the connection instructions and finally connecting the entire drawing to the network - check the operation of the lighting. After complete assembly of the suspended ceiling mount and enjoy the result. 

Backlight stretch ceiling LED ribbon inside (photo)

6 18trans 44 mg9584-copy 367bfc057797852fc4f4afd0a633e138 14340173618 arhitekturnoe-osveshhenie5 csc0104 dvuhurovnevye-natyazhnye-potolki-s-podsvetkoy-1 desktopwallpapersorgua-26661

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

84 + = 91