Decorative columns made of plasterboard with their hands: 3 setting stage
Interestingly and unusually decorate the interior help of the decorative columns gipsokartonaDo recent column in the far interiors served as the pillars. Now, in most cases, these elements play a decorative role in the design. Raised column become an integral part of both classical in a modern stylistic trends. In form they can be square, rectangular or circular cross-section, triangular rarer. Besides the basic functions - interior decoration column can serve as decorative boxes for communication or as a basis for the design of furniture, as well as the resonator sufficiently large room or decoration arches. How to make a similar element of the interior with their own hands? Consider a simple example.
Column of plasterboard with their hands: the preparatory stage
Any design of plasterboard presupposes a detailed drawing, which will help determine its design and calculate the materials. For the correct project is necessary to know the diameter of the future design, the shape and height. Also important stage - the preparation of the necessary tools.
Ready to install drywall columns should only be when there is all the necessary materials and tools for the job
- Drywall knife or jigsaw;
- Plate shears or bolgarka;
- Elbow and roulette;
- Ruler and pencil;
- A plumb and level;
- Screwdriver, electric drill and hammer drill;
- Spatulas and construction mixer;
- Compasses (in the case of the circular shape of the product).
Arsenal material includes a metal profile, drywall sheets, fasteners, primer, filler and serpyanku. If you plan a column with the presence of the outer corners need perforated angle for their registration.
How to make a string of plasterboard: set the frame
The frame is a supporting structure of the entire product. He shapes the future of interior elements, so the installation starts with its assembly. When the location of a future column is already defined, drafted and prepared surface to work, you are ready to install.
Getting to the installation of the column, you must first mount frame design
lathing apparatus stages:
- On the outline of the ceiling applied tower section, and then using a laser level or plumb, and a pencil image is transferred onto the floor. At this stage, you should pay special attention to the accuracy of marking. Otherwise, you can ruin the whole repair.
- Further, from a metal profile are made, and are attached to the corners of the floor and ceiling fixings along the contour marking. They serve for mounting racks. It is very important to strengthen the elements of clearly opposite to each other, so that the construction was flat.
- Rack profile is taken and cut into vertical furring elements according to the drawing parameters. The number of racks depends on the weight of the material and functional load column.
- Racks are fastened to the corners with screws.
- For the carcass reinforcement between racks mounted jumpers horizontally and diagonally.
If the column serves to conceal the duct water pipes, it is better to lay inside the frame sound-insulating material.
Sheathing column plasterboard
This step may be different specificity drywall workpiece and the required elements. For example, in the case of a circular column, the material must be bent, according to the diameter of the structure. Rectangular or square pillar in this plan is easier, however, there are some nuances.
An obligatory step in installing is correct markup columns gypsum board
Fixing plasterboard on the square-shaped products example:
- On the sheets GCR is marking the necessary elements and cutting material by means of the construction of the knife or jigsaw.
- To the frame using screws fasten all panels. The distance between the fastening points must not exceed 15 - 20 cm. Caps screws should be slightly recessed into the drywall.
At this stage, when screwing the screws, it is important not to push himself drywall. Should act cautiously. When the entire frame is hidden under the drywall, made the column trim.
Roughing and decorative finishing column
finishing step comprises sealing the seams, corners and surface smoothing treatment. joints are cut cutter place, sealed with putty and taped over serpyanku. While the putty hardens, you can proceed to the outer corners of the structure. The height of the column is cut perforated angle and attached to the outer corners on the filler. This element will serve as a kind of beacons in the alignment surface. Further mounted ceiling moldings. When putty on joints and corners hardens, it is possible to start to equalize the entire column surface.
Particular attention is paid to the experts recommend finishing columns of gipskoratona
In the selection of materials you can opt for a universal putty. It is applied in one layer and completely suitable for further decorative finishes.
When the surface becomes completely dry, you can proceed to the decorative finishing column. Design options are enough to make the right choice. The column can be finished with decorative plaster or liquid wallpaper, paint with acrylic paint, decorate a tile or stone. The only thing to consider: floor plinth is already mounted at the end of decorative finishes.
Doing the right thing: the columns of plasterboard (video)
To plaster column had finished look and fits perfectly into the interior premises, it is important to observe two rules of design: string can blend in with the overall design or be a bright accent in the interior. It is therefore important to choose the right trim.
Details: columns made of plasterboard with their hands (photo examples)