As plasterboard bend 3 uncomplicated method

As plasterboard bend 3 uncomplicated method

12 October 2017



Plasterboard has elasticity and flexibility that allows you to create intricate designs of curved formsPlasterboard has elasticity and flexibility that allows you to create intricate designs formVozmozhnosti curved drywall in interior decoration are almost limitless: the material is able to hide communication with it you can create any functional or decorative element of the interior, which will be pleasing to the eye for many years. Often, to create a unique design requires smooth bending of the sheet in a semicircle, which entails certain difficulties, however, with the right approach they really overcome even the novice.


Why you need to bend drywall: decor options

It has long been the drywall is not only used for covering flat surfaces (walls and ceilings). From it run multi-level ceiling structures of all kinds, archways and decorative elements of the interior. Bend gypsum board is required if the carcass structure involves flowing lines and curving contours.

The arched profile is used to create the decorative elements of plasterboardThe arched profile is used to create the decorative elements of plasterboard

Bending drywall suggest the following types of decorative designs:

  • Arches and poluarki classical type;
  • Niches in the walls with rounded elements;
  • Decorative partitions with curved elements of different modifications;
  • Plasterboard furniture with smooth lines;
  • Curved podiums;
  • Curly ceilings;
  • Wall decor (wave, flower, etc.).

In addition to flexible rounded drywall for interior elements, a special arched profile. This frame member has the same species as an ordinary metal profile, and performs the same function, only to create curvilinear designs.


Arched profile is a metal and plastic. He is able to take almost lyuboyu form, provided the design project.

Apart from the arched profile there are arched drywall, with which shaped structure to create a lot easier. Consider this species in more detail.

Plasterboard flexible: the characteristics and possibilities of the material

Ability bending gypsum board at home depends on the variety of the material. In addition to the arch, there is drywall wall and ceiling. The width of the different types of plasterboard sheet - from 6 to 12.5 mm.

Using arch drywall, you can realize the most daring design ideasUsing arch drywall, you can realize the most daring design ideas



Properties Arch drywall:

  • The minimum thickness of (6 - 6.5 mm);
  • Strength;
  • Fiberglass reinforcement core (prevents kinks);
  • Standard sheet sizes (1,2h2 m, 1,2h3,6 m);
  • Flexibility.

Using arch drywall is much easier to create shapes on the ceiling or other decor, as the material is quite easy to use. The maximum bending radius of the material is considerably greater than the ceiling or, especially, a wall of plasterboard.

But what if there is there is a maximum ceiling of GCR and arched even on sale there?

The "wet" method: how to bend the drywall in the home

This method involves the use of water. Due to its properties, drywall pretty quickly absorbs moisture and dries it becomes as hard as before, while maintaining the new predetermined shape. It is the most common option, however, he does not like for all figures. In this way it is possible to bend only silent plasterboard, having a gentle bend, not more.

Types of bending drywall: dry and wetTypes of bending drywall: dry and wet

Gnehm drywall "wet" method:

  1. Damp sheet uniformly with a brush, roller or water at room temperature tissue.
  2. After 15 minutes, when the material is soaked gently attach to it the desired shape. When drying drywall will remain in the same position.

To give the exact form of the future you can build a frame element and set it on the floor, putting it on top of some dry drywall so that it dried up, gradually taking a new look.


How to bend the plasterboard with their hands "dry" methods

This embodiment does not involve complete wetting of the sheet, however, it requires a special tool. In contrast to "wet", "dry" method can bend plasterboard element future construction even if it has a small radius.

The needle roller used for treatment of gypsum board in order to change its shapeThe needle roller used for treatment of gypsum board in order to change its shape

To do this, there are two ways:

  1. Using a needle roller;
  2. The use of a sharp knife.

The first method consists in treating the sheet spiked roller on both sides. Thus, protects from damage the cardboard gypsum core formed perforation. Sheet becomes more pliable and allows you to make a smooth slight bend. If the sheet is required to bend even more material can moisten a small amount of water at room temperature.


When using the needle roller can not be soaked sheet too intensively with water, as this may damage the material and bring it irreversibly in improper condition for operation.

Method using a sharp knife is used, usually, if not available needle roller. On the one hand (or the whole sheet) element future design made small incisions, the spacing between which is dependent on the desired bending radius (usually a 1 - 5 cm). The notches should be done as carefully as possible, affecting only a protective layer of cardboard, in any case without damaging the core. The incisions are made perpendicular to the bending. Which side of the material to cut - it depends on what kind of item it is: a convex or concave. A convex member is cut from the inner side of the sheet, a concave - from the front.

In the presence of the cutter, it is possible to bend the drywall as much as possible. The milling cutter is set to a depth of 3 - 5 mm (not all chosen to gypsum), and the pitch between the slits is dependent on the radius of future construction element.

Instructions: how to bend drywall (video)

Not always the first attempt to bend drywall finishes successfully. Beginners are encouraged to try all methods on a small fragment of the material, thereby selecting an optimal method. When working with plasterboard importantly - act carefully and take the time to not inadvertently break the sheet. And remember: always bend drywall along rather than across the sheet.

Successful transformations!

Комментарии

Leave a Reply

Your email address will not be published. Required fields are marked *

7 + 2 =

map